Will the stock ecu work?
10-23-02, 02:56 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2002
Location: Washington
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
Will the stock ecu work?
Ok guys heres the deal. Im going to be getting an aftermarket FI system. The throttle bodies will be weber dcoe style throttle bodies. They have 4 injectors total, Can I run the stock ecu to run these?
also it has a tps with 3 prongs. - ground, Signal out , +5v.
It also has 2 things for 2 map sensors.
Im looking for an aftermarket ecu but Im wondering if this will work with the stock ecu until I find a ecu to replace it with.
The company that sells the TB's has a microtech system that sells with it. Is this system very good (microtech)? I need a system for about $800 - 1,100 usd. Perferable the best for the money and to suit my application.
also it has a tps with 3 prongs. - ground, Signal out , +5v.
It also has 2 things for 2 map sensors.
Im looking for an aftermarket ecu but Im wondering if this will work with the stock ecu until I find a ecu to replace it with.
The company that sells the TB's has a microtech system that sells with it. Is this system very good (microtech)? I need a system for about $800 - 1,100 usd. Perferable the best for the money and to suit my application.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM