Engine Management Forum Use this area for discussing Haltech, Wolf 3D, Power FC, AEM and any other aftermarket ECU upgrades. Help/Questions/Tuning

First day with PFC and pulled a WRX STI

Thread Tools
 
Search this Thread
 
Old 10-16-02, 12:45 PM
  #1  
Eats, Sleeps, Dreams Rotary

Thread Starter
 
apneablue's Avatar
 
Join Date: Feb 2002
Location: North Coast
Posts: 3,045
Received 2 Likes on 2 Posts
Talking First day with PFC and pulled a WRX STI

Ok, so I finally got the PFC in and then let the car idle of about 20 minutes...the next day I got to drive it and test with a bunch of 3rd gear WOT tests...getting about 11.5psi ...Previously it was 9.5-10psi...

On the way home an WRX pulled in behind me and I flored it through 3rd and some of 4th until we ran out of road (max speed 195kmph) but I was watching him the rear view mirror and I was gaining on him...not super quick but noticable...my mods so far are DP, Intake, and PFC...Would this be normal to pull that car with these mods?

Also, I noticed that at close to redline the Commander beeped at me...does that mean I am hitting red line, or is it some serious warning or something?
Old 10-21-02, 05:22 AM
  #2  
WWFSMD

 
maxcooper's Avatar
 
Join Date: Jun 2001
Location: SoCal
Posts: 5,035
Likes: 0
Received 4 Likes on 4 Posts
Your FD should be faster than a WRX in stock form. You just would have been pulling away more slowly if you were stock.

The car will beep at you at 7500 RPM (manual transmission) in stock form to alert you that you are approaching redline. The PowerFC and Commander don't change this behavior, AFAIK.

-Max
Old 10-21-02, 06:17 AM
  #3  
Eats, Sleeps, Dreams Rotary

Thread Starter
 
apneablue's Avatar
 
Join Date: Feb 2002
Location: North Coast
Posts: 3,045
Received 2 Likes on 2 Posts
Thanks for the info Max...Much appreciated...I guess it's the first time I am taking the RPM up the high because I just started noticing it after the PFC install...also just put on the racing beat CB and it really rocks...

thanks again,

David
Old 10-23-02, 10:29 PM
  #4  
Rotary Enthusiast

 
RX7Elmo's Avatar
 
Join Date: Jul 2002
Location: CA
Posts: 896
Likes: 0
Received 0 Likes on 0 Posts
as far as i know they have not released the STI in the states yet?? I think it's pretty far in the works. IF it really was an STI i think it could pull a stock FD or even lightly modded one. It's advertised to have a good 280hp or 300hp at the crank.

Danny
Old 10-29-02, 09:25 PM
  #5  
The Power of 1.3

 
911GT2's Avatar
 
Join Date: Aug 2001
Location: Shrewsbury, Massachusetts
Posts: 2,837
Likes: 0
Received 0 Likes on 0 Posts
a stock WRX, in non STi trim can pull a quarter in about 14.3. STi adds about 50 hp bumping the total to, as was stated earlier by RX7Elmo, about 290hp. That should be good enough to keep up with even a lightly modded FD
Old 10-30-02, 08:19 PM
  #6  
Senior Member

iTrader: (2)
 
LetsGO7's Avatar
 
Join Date: Oct 2001
Location: Orange County, CA
Posts: 456
Likes: 0
Received 0 Likes on 0 Posts
i don't think it's fair to compare new STI and a 10 year old FD. Now, if you compare the new FD and STI, that would be a reasonable fight...of course, FD will kick butt!
Old 11-05-02, 07:57 AM
  #7  
trying to build a racecar

 
Travis R's Avatar
 
Join Date: Sep 2002
Location: Austin, Tx.
Posts: 580
Received 1 Like on 1 Post
Stock WRX's have 227hp, the STi, *when* it's released, will probably only have about 260hp. The sedans weigh between 3000 and 3100 lbs. So I would hope that a modded FD would pull away. The launches are insane though.

Travis
2002 Black WRX wagon
1988 RX7 GTU autocross project
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ray green
1st Gen General Discussion
2
09-02-15 06:35 AM
torky007
3rd Generation Specific (1993-2002)
7
08-17-15 05:14 PM



Quick Reply: First day with PFC and pulled a WRX STI



All times are GMT -5. The time now is 05:40 AM.