I was just wondering if there is anyone on this forum that is useing this EMS unit. I have one on my FC, but I'm thinking about makeing the switch to Haltech. Becuase i have no maps and my tuner moved to an other city. I'm also makeing some changes to current setup and will need new maps.
Thanks
Scott

 

yep, well kinda.

I'm running an EMS DS type R. This is the dedicated rotary-only version. You can send your board back to EMS to get this upgrade. Basically you just get Leading/Trailing split

I'm running it on a '1995 FD motor with the auxiliaries running the twin-turbo solenoids and the stock mazda computer running the OMP and idle.

No mods except a 3" exhaust from the turbos back. The early tuning was done with an Autronic Lamda sensor (you can hook it up directly to the EMS)

Fuel economy is no different to stock.
-pete

 

I have the QI-4 fuel and ingition computer. I'm building a big street ported 13b rew with an 87 turbo2 front cover and omp. I also going with a big turbo (t72 or t78) . But i have no one to tune it. Is there a forum for EMS owers where i can share maps? If not then I'll have to switch to Haltech.
Thanks,
scott

 

No but you can talk to EMS directly
www.fuel-injection.com
They can (and do) send you maps from similar setups.

-pete

 

Thank you Pete for the link.
-scott