i was moving my e-01 display and i needed to reroute the wires, the easiest way to do this was to take the 3 screws out of the display and unplug them from the circut board. Well when i went to plug them back in i had no display.

there are 2 wires, one is for the handheld controller and the other for the cable between the e-01 and its display unit. well they are the exact same plugs, and i think i may have had them reversed the first time, which might have burned out some things on the circut board.

I took the circut board out and looked it over and there are a few spots that have a yellowish liquid. I'm guessing this could be my problem. I contacted greddy support and they were no help at all. said it was discontinued and they had no parts, no nothing. I asked if they had a schematic i could take along with the board to someone locally, no they cant give me that.

So i need to figure out how to go about fixing this on my own. Any ideas from some people that know about circuit boards?

i'll take some pics when i have access to my gf's dig camera