Electromotive Ignition question
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Jul 2010
Location: NC
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Ignition question
How do i tell if I have a bad igniter ?
My 7 is warmed up I pulled the plug from igniter off on the left of the dist. and the car stalls out when i try to do the same on the right igniter the car keeps running is that how its suposed to run ?
Also are both coil packs supposed to make spark when running ?
I only have the one closest to the strut tower that sparks and the one next to the battery does nothing would yhat be besaue of a bad igniter?
My 7 is warmed up I pulled the plug from igniter off on the left of the dist. and the car stalls out when i try to do the same on the right igniter the car keeps running is that how its suposed to run ?
Also are both coil packs supposed to make spark when running ?
I only have the one closest to the strut tower that sparks and the one next to the battery does nothing would yhat be besaue of a bad igniter?
#3
Doesn't suck
iTrader: (5)
Join Date: Dec 2004
Location: Pensacola FL
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
Why do you think you have a bad ignitor? aka: what made you start pulling wires? did I read right when you said you pulled a wire off a distributor? Are you sure you have an elecromotive? would this be better served in the 1st gen section?
I have a hunch you posted in the wrong forum. Give us more details about your car/engine management. If you had a TEC you wouldn't have a distributor.
**further more, your profile says you have an 85 gsl, they have no ECU. Ask a mod to move you
I have a hunch you posted in the wrong forum. Give us more details about your car/engine management. If you had a TEC you wouldn't have a distributor.
**further more, your profile says you have an 85 gsl, they have no ECU. Ask a mod to move you
#5
Doesn't suck
iTrader: (5)
Join Date: Dec 2004
Location: Pensacola FL
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
NP man, Get someone with real power to move you, or just post there. when you do get in the right section, answer my first paragraph.
And don't forget to read the new member forum, read tips for using the forum, and introduce yourself in the appropriate section. I have a haltech in my FB and really know little about distributors, but the 1st gen guys will get you straight. Good luck!
And don't forget to read the new member forum, read tips for using the forum, and introduce yourself in the appropriate section. I have a haltech in my FB and really know little about distributors, but the 1st gen guys will get you straight. Good luck!
#6
Can Post Only in New Member Section
Thread Starter
Join Date: Jul 2010
Location: NC
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
The reason why is because lack of power so I`m just trouble shooting also the top two spark plugs are clean like its not igniting and the coil closest to the battery is not throwing out any sparks.
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
SakeBomb Garage
0
09-04-15 05:20 PM
SakeBomb Garage
Vendor Classifieds
0
09-04-15 05:19 PM