Drifting Discuss Drifting and drifting techniques here.

slowgxl:RX-7 build

Thread Tools
 
Search this Thread
 
Old Jun 18, 2012 | 02:28 AM
  #1  
slowgxl's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2011
Posts: 338
Likes: 0
From: houston, tx
slowgxl:RX-7 build

Whats up guys its late and i'm bored...always wanted to start one of these so why not here. Its a 1988 mazda rx7 gxl. Bought it at 99,XXX and slowly have been modding it to a drift car/daily. Still working on the drifting part...gotten better but i need more seat time. Okay enough talking now on with the pics!

When i got it...4x4 like a boss. Also had blown rear shocks and the trans mounts were blown to hell.


Put some kyb agx to at least make it ride better and then i got a good deal on some 18's


then i bought some ground control coilovers and camber plates that fit on to my kyb agx's. only pic i could find lowered with the 18's. kind of wish i went lower when i was on them


then i got bored of trying to drift on big heavy *** wheels...so i sold them. then i was on the hunt for some crown vic wheels. no luck on finding them but my two best friends picked up a set for me for christmas.

went a lot lower to pull the look off...now its so much funner to drift and drive! while i was doing all this i fixed the trans mount with polly ones. also changed my engine mounts too.

i also started to get bored with the look of the car...so i got a volvo lip from a junk yard for $5


happy with what i have done and now i just wanna keep up maintenance. plans are to get better at driving it/drifting it. do some bolt on mod like intake and exhaust(anyone got some one of these hit me up) also freshen up my diff and maybe weld it later down the road. oh and can't for get put on a badass aero kit.

some of my inspiration:




got a few parts in the mail this week. I got a used BOSS hub from japan and the seller was nice enough to send me some Japanese snacks too.

Also got the mazdatrix bump steer kit since my outer tie rods are going out.

So plans for the car
*Keep up with maintenance
*Get more steering angle out of the car (rx7 have shitty steering angle in stock form)
*Badass areo kit
*Basic bolt on to get some power out
*Get 4.30 gears for the rear end (then shim or weld it)
*And get as much seat time as possible

Oh and before i forget if anyone is selling a nardi or momo for a fair price hit me up.
Reply
Old Jun 18, 2012 | 06:48 PM
  #2  
ComicArtist's Avatar
Senior Member
 
Joined: Nov 2011
Posts: 418
Likes: 0
From: Oklahoma City, OK
Nice start! I'm also on crown vic wheels lol. Definitely go welded, you won't regret it.
Reply
Old Jun 18, 2012 | 07:04 PM
  #3  
skitso's Avatar
Junior Member
 
Joined: May 2012
Posts: 15
Likes: 0
From: Charleston, SC
Really looking forward to seeing this build. I too have an 88 gxl, same color as yours and everything that I'm also looking to start drifting.
Reply
Old Jun 18, 2012 | 07:08 PM
  #4  
slowgxl's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2011
Posts: 338
Likes: 0
From: houston, tx
thanks guys....gotta love the crown vic wheels. super cheap and easy to find. also plan on keeping it the same color.
Reply
Old Jun 18, 2012 | 07:11 PM
  #5  
slowgxl's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2011
Posts: 338
Likes: 0
From: houston, tx
got bored one day and test fitted by buddy's advan avs5. 16x7 +35(i think) and 17x9+22

Reply
Old Jun 18, 2012 | 08:13 PM
  #6  
ComicArtist's Avatar
Senior Member
 
Joined: Nov 2011
Posts: 418
Likes: 0
From: Oklahoma City, OK
Originally Posted by slowgxl
got bored one day and test fitted by buddy's advan avs5. 16x7 +35(i think) and 17x9+22

I'm not overly fond of staggered diameters, but those do look good.

Mine's an '88 gxl as well! Got it running yesterday haha and there's already tire marks in my neighborhood
Reply
Old Jun 18, 2012 | 10:13 PM
  #7  
slowgxl's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2011
Posts: 338
Likes: 0
From: houston, tx
Thanks man...needs spacers in the front an a little bit bigger tire size, but other then that there awesome. Planing on buying them from him later.
Reply
Old Jun 19, 2012 | 12:07 PM
  #8  
NealP's Avatar
Full Member
Tenured Member 05 Years
iTrader: (11)
 
Joined: Sep 2011
Posts: 99
Likes: 2
From: Union, NJ
Advans look really cool. You have a pretty clean car
Reply
Old Jun 19, 2012 | 02:13 PM
  #9  
slowgxl's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2011
Posts: 338
Likes: 0
From: houston, tx
thanks guys...i'll keep you guys updated on whats going. just trying to pay some bills down.
Reply
Old Jun 19, 2012 | 04:33 PM
  #10  
cosmo7's Avatar
BRAP!!
Tenured Member 10 Years
iTrader: (3)
 
Joined: Dec 2008
Posts: 661
Likes: 0
From: california
looking good man
Reply
Old Jun 19, 2012 | 09:05 PM
  #11  
iAlexxx's Avatar
Junior Member
 
Joined: Aug 2011
Posts: 23
Likes: 0
From: Sarasota Fl.
Your car looks exactly like mine but grey haha. What Volvo is that lip off of? Looks sweet! Expecially for 5$ haha.

Reply
Old Jun 20, 2012 | 08:18 AM
  #12  
slowgxl's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2011
Posts: 338
Likes: 0
From: houston, tx
Nice....also the lip is from Volvo 740.
Reply
Old Jun 21, 2012 | 12:42 AM
  #13  
rx7w/yaw's Avatar
Stay Into It!
iTrader: (1)
 
Joined: Feb 2010
Posts: 134
Likes: 0
From: lewis county Wa
Are you planning on boosting sometime in the future? I'm also on an n/a glx, with coilovers, rb header/2.5in to stock-ish y-pipe and mufflers. I have a welded diff waiting to be slapped in but I just find myself wanting more mustard out of my fc...

Anyways good luck with it and its looking like a great start!
Reply
Old Jun 21, 2012 | 09:10 AM
  #14  
slowgxl's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2011
Posts: 338
Likes: 0
From: houston, tx
Rx7w/yaw: yes I plan on boosting it in the future. I agree it needs more power. But I do a mix of grip/drift driving so I don't mind. Learning how to drive in a underpowered car force you to try harder. Forces you to relie on your driving skills and not on your car.
Reply
Old Jun 21, 2012 | 07:36 PM
  #15  
rx7w/yaw's Avatar
Stay Into It!
iTrader: (1)
 
Joined: Feb 2010
Posts: 134
Likes: 0
From: lewis county Wa
I've learned the balance and powerband of the fc fairly well... I just get the feeling like I've gotten bored with it and I need more power. Don't take that wrong, its a great car and very fun, I just need to throw something else in the mix (I.e. port work, turbo, ls1... jk). Idk I prolly just need one good track session and I would know what I want out of the seven.
Reply
Old Jun 21, 2012 | 08:29 PM
  #16  
tuscanidream's Avatar
T2 Duo!
iTrader: (6)
 
Joined: Oct 2010
Posts: 1,665
Likes: 3
From: RI/CT
Those advans look amazing on your car.
Reply
Old Jun 23, 2012 | 10:20 PM
  #17  
slowgxl's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2011
Posts: 338
Likes: 0
From: houston, tx
rx7w/yaw: yeah i know what you mean and thanks tuscanidream...wish they were mine.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Einheri
Single Turbo RX-7's
14
Oct 7, 2015 12:23 PM




All times are GMT -5. The time now is 11:17 PM.