Is It Pink or Rasta Chameleon????
04-20-10, 01:31 AM
#30
\\TRASHTALK//
Thread Starter
im getting real close to painting this ****.
im going with a gallon on the DBC 500 with 4 oz. of pearls and other ****. its gonna pop for sure.
looks like im going to shoot the two tone purps with the body color, then DA the clear with 320 or some ****, then shoot 2 or 3 coats of the pearl.
ill update with pics.
im going with a gallon on the DBC 500 with 4 oz. of pearls and other ****. its gonna pop for sure.
looks like im going to shoot the two tone purps with the body color, then DA the clear with 320 or some ****, then shoot 2 or 3 coats of the pearl.
ill update with pics.
04-20-10, 10:27 AM
#31
Exactly jus spray the pearl on when the base is raw
with an inter-coat clear, plus 320 is way to coarse like slide said
when I do any work over existing clear I always just hit it up wit 600 wet or dry
your just going to **** **** up with 320 and if your not careful with it your going to sand thru
with an inter-coat clear, plus 320 is way to coarse like slide said
when I do any work over existing clear I always just hit it up wit 600 wet or dry
your just going to **** **** up with 320 and if your not careful with it your going to sand thru
04-20-10, 10:28 AM
#32
Exactly jus spray the pearl on when the base is raw
with an inter-coat clear, plus 320 is way to coarse like slide said
when I do any work over existing clear I always just hit it up wit 600 wet or dry
your just going to **** **** up with 320 and if your not careful with it your going to sand thru
with an inter-coat clear, plus 320 is way to coarse like slide said
when I do any work over existing clear I always just hit it up wit 600 wet or dry
your just going to **** **** up with 320 and if your not careful with it your going to sand thru
04-21-10, 12:09 AM
#35
\\TRASHTALK//
Thread Starter
Thanks for the advice dudes. I have never spray pearls over a clear, i know wet sanding comes out super smooth, but ive used 320 with the da over a cleared test panel, then pearl. it came out super smooth, but i can see how the pearls can be affected by too rough a surface. im gonna wet sand for sure. i
i figured i would spray the car with no over fenders, then match them when i get them
corey, i have alot of product, all you need is reducer and the base coat which should be around $200. depends on what product. DBC cost more than MBC if you use PPG. Chromabase looks bad ***.
i have the rest of the week off so hit me up for sure.
i figured i would spray the car with no over fenders, then match them when i get them
corey, i have alot of product, all you need is reducer and the base coat which should be around $200. depends on what product. DBC cost more than MBC if you use PPG. Chromabase looks bad ***.
i have the rest of the week off so hit me up for sure.
04-27-10, 07:01 PM
#37
\\TRASHTALK//
Thread Starter
just got the AEM wideband. its tuned and smashing hard for stock turbo. im actually running out of fuel and i have -6 from the filter to the rails. also have 550 primary and 720 secondary. its got a solid tune, im really happy with it
i finally have a booth that i can take it to. so sick its actually gonna be free as well. so as soon as i find out what rear overfender to order, install it, then prime and head to the booth.
so are the 50mm origins nice? they look like they extend over the rear you know where the hatch is? they also dont go under the side skirt and rear bumper...
i finally have a booth that i can take it to. so sick its actually gonna be free as well. so as soon as i find out what rear overfender to order, install it, then prime and head to the booth.
so are the 50mm origins nice? they look like they extend over the rear you know where the hatch is? they also dont go under the side skirt and rear bumper...
[/IMG]
05-07-10, 03:21 AM
#47
\\TRASHTALK//
Thread Starter
slydur your **** is sick. i definately need those rears.
paint isnt too far away. ive been bustin *** on the fc. i gotta get some pics up for sure. i did the dash up and it looks dope. made some new angle mods and they are ****** too much angle
spinnin 275's or 285's stock turbo haha. its all in the tune
paint isnt too far away. ive been bustin *** on the fc. i gotta get some pics up for sure. i did the dash up and it looks dope. made some new angle mods and they are ****** too much angle
spinnin 275's or 285's stock turbo haha. its all in the tune
