Ok so I want to keep my ABS intact for driving to and from the track and around town to shows and such, but want to be able to shut the ABS off for the track. I have read a little about this on the internet, but can't find any info on any install on any car ever besides a land rover.

Help info...directions towards a install....info....help LOL

 

Tell me if this sounds crazy...

pull fuse, get fuse taps..go from the hotside of the fuse (ignition on) to a switch with an inline fuse rated the same as the normal fuse, from the switch back to the other fuse tap....

circuit open no abs,,,,circuit closed abs on???

 

Just pull the fuse and no abs. Put the fuse back in and you have it again. Much easier.

 

Yes unless you are doing it often. I would much rather just press a button. Lol. Personal preference.

 

run a wire out of one side of that abs fuse inline fuse then switch then beck to the other side of the fuse

 

put a switch on the ground side of the abs fuse that way you burn out switches and wallah

 

pulling a fuse isnt that hard to do.