Who can fab some mounts for me?
#1
High Comp Booster
Thread Starter
iTrader: (4)
Join Date: Apr 2009
Location: Oakville, Ontario
Posts: 1,907
Likes: 0
Received 0 Likes
on
0 Posts
Who can fab some mounts for me?
Anyone in the burlington to mississauga area that can fab up motor mounts for me?
Im looking to put a 1jz in to an fc I just need mounts everything else i can fab up where i am
truthfully id prefer not a shop (cause they charge shop prices lol) but a guy with a garage that knows how to weld or can help me out here
thanks guys
Im looking to put a 1jz in to an fc I just need mounts everything else i can fab up where i am
truthfully id prefer not a shop (cause they charge shop prices lol) but a guy with a garage that knows how to weld or can help me out here
thanks guys
#2
Spoolin'
iTrader: (6)
I know a guy in Mississauga that did a few 1jz swaps in FCs ....
Last time I talked to him, he wanted $1500 - $2000 for labor and anything he needs fabbing up, provided you supply motor, tranny, ecu and wiring.
Let me know if you want his contacts
Last time I talked to him, he wanted $1500 - $2000 for labor and anything he needs fabbing up, provided you supply motor, tranny, ecu and wiring.
Let me know if you want his contacts
Anyone in the burlington to mississauga area that can fab up motor mounts for me?
Im looking to put a 1jz in to an fc I just need mounts everything else i can fab up where i am
truthfully id prefer not a shop (cause they charge shop prices lol) but a guy with a garage that knows how to weld or can help me out here
thanks guys
Im looking to put a 1jz in to an fc I just need mounts everything else i can fab up where i am
truthfully id prefer not a shop (cause they charge shop prices lol) but a guy with a garage that knows how to weld or can help me out here
thanks guys
Trending Topics
#8
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
I saw a dude on forum did that swap./don't ask me who.
I'd be Hunting around on the forum.Maybe if you can find the Guy, Pm him ,and ask him who he got his mounts off of.
I'd be Hunting around on the forum.Maybe if you can find the Guy, Pm him ,and ask him who he got his mounts off of.
#9
High Comp Booster
Thread Starter
iTrader: (4)
Join Date: Apr 2009
Location: Oakville, Ontario
Posts: 1,907
Likes: 0
Received 0 Likes
on
0 Posts
Just wiring it in will be fun, plumbing the rad and an intercooler
But the hardest part IMO is finding a good set of brackets for mounts is what i need right now or I should say is where to get a good set i give myself realistically about 2 months before i can put a motor in
gotta save that coin motor went when I was just starting to think about doing this
#12
High Comp Booster
Thread Starter
iTrader: (4)
Join Date: Apr 2009
Location: Oakville, Ontario
Posts: 1,907
Likes: 0
Received 0 Likes
on
0 Posts
Go see Aaron @ http://www.weirtech.ca/
Shame on you for pulling the heart out of a 7
Shame on you for pulling the heart out of a 7
Lol I would keep it But i don't trust Buying a jdm keg, and i dont want to spend 2k to rebuild it stock properly (i know it will need Housings at least one)
i feel comfortable with the 1jz and the power it can build even though ill miss the powerband of the rotary I'll love having torque lol
Strangely enough i've been looking at granny's speed shop swap a v8 kit from them is dirt cheap.....
Hybrid G if you have a garage I'd be more than willing to pay you for your time I dont mind cutting up stuff and fabbing i just don't trust my welding and dont have a place to do it
#17
High Comp Booster
Thread Starter
iTrader: (4)
Join Date: Apr 2009
Location: Oakville, Ontario
Posts: 1,907
Likes: 0
Received 0 Likes
on
0 Posts
there is a guy in the philipines that is making a mount kit but im not sure of the eta so im throwing a t2 keg in with a 60-1 turbo for now it should hold me over.... lol
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
SakeBomb Garage
0
09-04-15 05:20 PM
SakeBomb Garage
Vendor Classifieds
0
09-04-15 05:19 PM