Canadian Forum Canadian users, post event and club info here.

so my na is toast :(

Thread Tools
 
Search this Thread
 
Old 01-29-11, 06:16 AM
  #1  
What am I doing...

Thread Starter
iTrader: (2)
 
Mr.Cool's Avatar
 
Join Date: Jul 2009
Location: Toronto
Posts: 481
Likes: 0
Received 0 Likes on 0 Posts
so my na is toast :(

i was out having fun with some friends tonight and i decided i was to go for a bit of a cruse, we ended up making it to niagara falls, right to the actual falls. after hanging around for a bit i decided to head back home, it was about 3:20am. as im driving i notice my temp gage is high but that in my car is normal. my temp gage usually goes all the way up for warm up then comes back down as the car gets warmer. but this time it dident it continued up until it was practically vertical, i could smell something coming from the engine bay as well i quickly noticed a loss of power. so i shut the car down and coasted for a but hoping it would help, while the car was still moving i tried to start it, but got absolutely nothing, so once i was down to around 20km/h i tried to start if my dropping the clutch. which seemed to work. then boom huge clouds of white smoke pours out from the hood. after opening the hood i dont see and actual damage but the rad cap released spraying coolant everywhere. when i tried turning it over smoke would pour from behind the rear rotor almost looking like it was coming from where the trans connects to the engine.

so i get a tow all the way back from grimsby. i figure its completely toast. so does anyone have a kicker motor laying around the would fit in my 88 gxl? my jeep went out last week(i knew that was coming) and now my gxl which is my only other car that i can drive.

thanks
all help is greatly appreciated
Old 01-29-11, 07:54 AM
  #2  
what was my time..Ah ****

iTrader: (2)
 
13BbackFire's Avatar
 
Join Date: Mar 2010
Location: Mississauga Ontario
Posts: 569
Likes: 0
Received 0 Likes on 0 Posts
Hey, ill talk to my buddy today i think he has one *just motor is great running condition* ill see if he wants to sell it!! get back to you later today!!! dam... sorry for the loss buddy! hope everything works out!!
Old 01-29-11, 08:32 AM
  #3  
Beyond

iTrader: (36)
 
Ka Kui's Avatar
 
Join Date: Apr 2005
Location: Markham, Toronto
Posts: 1,908
Received 4 Likes on 4 Posts
Damn, hope you can get one asap......
Old 01-29-11, 12:18 PM
  #4  
From the Roots Up!

iTrader: (11)
 
CS13B's Avatar
 
Join Date: Feb 2010
Location: GTA, Ontario
Posts: 1,660
Received 2 Likes on 2 Posts
Is Theory still selling his s5 engine?
Old 01-29-11, 03:34 PM
  #5  
High Comp Booster

iTrader: (4)
 
Bwek's Avatar
 
Join Date: Apr 2009
Location: Oakville, Ontario
Posts: 1,907
Likes: 0
Received 0 Likes on 0 Posts
Theory's motor is an S4 WIth S5 intake on it so it would be perfect for this car

Hell I'd even buy the clutch and tranny and you can have the motor if he wanted to part it out
Old 01-29-11, 04:03 PM
  #6  
What am I doing...

Thread Starter
iTrader: (2)
 
Mr.Cool's Avatar
 
Join Date: Jul 2009
Location: Toronto
Posts: 481
Likes: 0
Received 0 Likes on 0 Posts
unfortunately im fairly low on cash until Thursday, right now i only have about 200 to my name. so im looking for something kinda cheap unless your willing to let me pay you over time. things have just been going in the ******* lately. thanks for all the help guys, this is what makes the rx7club community so great.
Old 01-30-11, 11:19 AM
  #7  
What am I doing...

Thread Starter
iTrader: (2)
 
Mr.Cool's Avatar
 
Join Date: Jul 2009
Location: Toronto
Posts: 481
Likes: 0
Received 0 Likes on 0 Posts
hay just wondering if any one has found anything yet. i think today ill start ripping this one out.

thanks
Old 01-30-11, 11:28 AM
  #8  
Neo
Eats, Sleeps, Dreams Rotary

iTrader: (4)
 
Neo's Avatar
 
Join Date: Feb 2001
Location: Aurora, Ontario, Canada
Posts: 3,880
Received 321 Likes on 164 Posts
This is very unfortunate.
Hopefully someone's got a spare engine kicking around.

I'll keep an eye out for anyone who's letting go of an engine.

All the best.
Old 01-30-11, 08:42 PM
  #9  
Senior Member

iTrader: (1)
 
djphonics's Avatar
 
Join Date: Sep 2006
Location: Oakville Ontario Canada
Posts: 700
Likes: 0
Received 0 Likes on 0 Posts
sorry to hear this patrick, we'll hopefully find something for you, your timing to the falls was too good
Old 01-30-11, 09:44 PM
  #10  
What am I doing...

Thread Starter
iTrader: (2)
 
Mr.Cool's Avatar
 
Join Date: Jul 2009
Location: Toronto
Posts: 481
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by djphonics
sorry to hear this patrick, we'll hopefully find something for you, your timing to the falls was too good
lol ya i know, but surprisingly it blew up on the way back when i wasnt pushing it all that hard. but maybe it was an after effect, o well its to late now.

heres what me and my friends did today.
Attached Thumbnails so my na is toast :(-dvc00107.jpg  
Old 01-31-11, 08:24 AM
  #11  
Rotary Freak

 
23Racer's Avatar
 
Join Date: Jul 2003
Location: Oakville, Ontario
Posts: 2,199
Received 9 Likes on 9 Posts
Ummmmmm...... pulling your motor on the street in front of your house ????? You know that we are supposed to get about 20 cm's of snow starting tuesday. If you only have about $200 and you need a motor then I think you may have to wait a while. I don't understand pulling it all apart until you have a motor available to put in. How are you going to get it off the street when you need to so the plows can clear the street off? Don't you know anybody with a garage who would help you out when you get the new motor?

It may be easier and cheaper to fix up your Jeep than to get a good working 13b for a few hundred. It may be easier to get a winter beater than to find a new motor. Not trying to be a jerk or sound like your dad, but maybe you should think things out a bit and make your circumstances meet your budget and available resources. Call Al at Woodbine Toyota. Tell him whats going on and where you are from and that you are desperate. He may have a line on a beater for money you can scrape together and then fix your RX when you have the cash and resources to do it right. I wouldn't want to lay on my back on a street 5cm in slush deep and undo the transmission parts on a car that hasn't been apart in who knows how long.
Old 01-31-11, 09:37 AM
  #12  
What am I doing...

Thread Starter
iTrader: (2)
 
Mr.Cool's Avatar
 
Join Date: Jul 2009
Location: Toronto
Posts: 481
Likes: 0
Received 0 Likes on 0 Posts
the engine is blown bad, meaning it dosent start nor does it seem to have and compression at all. its ok on thursday i will have 900. im taking everything out so that when i get the new engine ill be at the stage where i can just go ahead and put it in. my driveway is the one infront of the car but if you see the jeep in the background thats the driveway im using. i just had the car on the road since i was towed home from grimsby the car rolls easy so me and my friend are going to push it into the driveway today, i dont mind working on my car outside in the cold. i would use my dads shop but hes painting his car in there so im guaranteed to get over spray on my car/ be in his way. other than that i dont have a garage that i can get it into.

Last edited by Mr.Cool; 01-31-11 at 09:41 AM.
Old 02-04-11, 10:28 AM
  #13  
Rotary Enthusiast

iTrader: (8)
 
Casual_John's Avatar
 
Join Date: Jul 2007
Location: London, CANADA
Posts: 893
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Bwek
Theory's motor is an S4 with an S5 intake on it so it would be perfect for this car
I believe that S4 was just rebuilt. And Theory got the S5 intake working too. It was pulling strong before he decided to part out his car.
I've bought stuff from him. He is a good seller.
He is even throwing in a turbo transmission. You could probably sell the tranny separately to help pay for the motor.
Old 02-04-11, 11:26 AM
  #14  
What am I doing...

Thread Starter
iTrader: (2)
 
Mr.Cool's Avatar
 
Join Date: Jul 2009
Location: Toronto
Posts: 481
Likes: 0
Received 0 Likes on 0 Posts
i should be picking up theorys motor tommorow.
Old 02-15-11, 09:31 PM
  #15  
BRAP PSHHH

iTrader: (2)
 
sctRota's Avatar
 
Join Date: Jan 2010
Location: Woodbridge, Ontario
Posts: 1,359
Received 7 Likes on 7 Posts
I get so scared when I hear these stories man. Best wishes on getting your beast up and running again dude
Old 02-15-11, 10:02 PM
  #16  
Senior Member

iTrader: (1)
 
djphonics's Avatar
 
Join Date: Sep 2006
Location: Oakville Ontario Canada
Posts: 700
Likes: 0
Received 0 Likes on 0 Posts
i considered purchasing theorys car. i can attest that the motor pulled very well! you'll enjoy it very much

Last edited by djphonics; 02-15-11 at 10:08 PM. Reason: btw if you need a hand, let me know
Old 02-15-11, 10:19 PM
  #17  
High Comp Booster

iTrader: (4)
 
Bwek's Avatar
 
Join Date: Apr 2009
Location: Oakville, Ontario
Posts: 1,907
Likes: 0
Received 0 Likes on 0 Posts
im interested in the tranny and clutch from theories setup
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
zuesskroph
2nd Generation Specific (1986-1992)
0
08-13-15 06:05 PM
EL Mac
2nd Generation Specific (1986-1992)
10
07-31-02 01:20 PM
78Z
1st Generation Specific (1979-1985)
18
07-11-02 03:20 PM
SupraKiller
3rd Generation Specific (1993-2002)
4
06-08-02 09:24 AM



Quick Reply: so my na is toast :(



All times are GMT -5. The time now is 09:05 PM.