I was going to buy from Silicone Intakes but all of a sudden everything is out of stock.

I need some hose for turbo to intercooler. IE 90degree 3" to 3". 2" straight etc in black.

Were does everyone purchase there hoses from?

Thanks,
Ian

 

Vibrant stocks many of the same parts Silicone Intakes does. ATP turbo has a good selection.

Many hydraulic stores can order them as well, but you'd have to check.

 

JRP carries everything in stock.

thewird

 

Thanks guys.

I know Vibrant does not have 3" to 2" 90° elbows.

Will call JRP to see what they can get

 

Hey, I might have what you need. All Vibrant products, used though.
Let me know if your interested.

 

Sure I would be interested. How much and what do you have. I need a 2" to 2" 90 degree. 3" to 2" transition 90 degree and a 2" to 2 " straight.

I know JRP/vibrant does not have the 3" to 2" transition peice so you may not. I would prefer all the same look to the hose. Don't want one blue and one black. LOL. Engine bay has to match.

 

Cooldirect.ca for good priced mishimoto couplers.

 

Hey Ian, let me double check your list and I'll see if I can help you out.

 

Hi Ian, I just checked my stash.
Everything I have is 21/2"-3" or 21/2"-21/2"
Sorry I couldn't help.

 

Thanks for looking.

 

Edit: nvm haha

 

How about these?

 

Its red! LOL What size are those? Seriously how come nobody can get the 3" to 2" transition. LOL> Might just have to buy the raising RPM Rising RPM - RX7 - Throttle Body Inlet Duct. Its 2.5" So that will work.

 

Just sell me that ARC top mount you have and go v mount lol! No longer a problem!

 

No way LOL. It took me 6 autoparts stores just to get an alternator belt to fit. The speed I am moving on this project I am wondering if I will have it complete this year.....

 

Find someone with a TIG welder and have them change the size of what you need to connect it to.

 

Ya. But any shop around will say CUSTOM and all of a sudden its a $4 billion dollar job.... I bet you its cheaper to buy the RPM inlet then getting someone to cut and weld it.

I could also use the excuse to try and use my MIG welder/aluminum practice. LOL I have two inlets I can muck around with.