RPM Motorsports new shop!
#1
Likes to swear....alot
Thread Starter
iTrader: (3)
Join Date: Dec 2002
Location: Kitchener Ontario Canada
Posts: 3,791
Likes: 0
Received 3 Likes
on
3 Posts
RPM Motorsports new shop!
Well I figured its time to let everyone know that we're finally getting settled into our new shop.
Lots of people have been asking about our new contact info and address, so here ya go!
We're located at 250 Woolwich St Unit 12, Breslau Ont, N0B 1M0. Our entire shop and office is about 4500 sq/ft which means LOTS of room for cars to be stored inside. No customers cars will ever be left outside.
The shop number is 519-513-0350 and fax # 519-513-0351.
We have also changed our name a little, now called RPM Motorsports, we now work on pretty much any type of import performance cars. Mostly dealing with Rotaries. As much as I'd like to be completely Rotary specific, we just can't stay busy enough right now to turn away other jobs. (Although because its spring, we are already pretty busy with Rotary work to keep us going).
We are also getting into the fabrication side of things as well as retailing new products from other companies. Here is where you (the consumer) comes in.....what do you guys want fabricated for your cars? Tell us and we can either one-off fab it or possibly put it into production. More details of this sort of thing once our new website is going.
If your ever in the area then stop by and check out the crazy projects we have going on. We're around every week day from 10am until sometimes midnight.
Heres a few pics of the inside shop area
Getting all my parts sorted out......kinda lol.
Lots of people have been asking about our new contact info and address, so here ya go!
We're located at 250 Woolwich St Unit 12, Breslau Ont, N0B 1M0. Our entire shop and office is about 4500 sq/ft which means LOTS of room for cars to be stored inside. No customers cars will ever be left outside.
The shop number is 519-513-0350 and fax # 519-513-0351.
We have also changed our name a little, now called RPM Motorsports, we now work on pretty much any type of import performance cars. Mostly dealing with Rotaries. As much as I'd like to be completely Rotary specific, we just can't stay busy enough right now to turn away other jobs. (Although because its spring, we are already pretty busy with Rotary work to keep us going).
We are also getting into the fabrication side of things as well as retailing new products from other companies. Here is where you (the consumer) comes in.....what do you guys want fabricated for your cars? Tell us and we can either one-off fab it or possibly put it into production. More details of this sort of thing once our new website is going.
If your ever in the area then stop by and check out the crazy projects we have going on. We're around every week day from 10am until sometimes midnight.
Heres a few pics of the inside shop area
Getting all my parts sorted out......kinda lol.
Trending Topics
#8
Likes to swear....alot
Thread Starter
iTrader: (3)
Join Date: Dec 2002
Location: Kitchener Ontario Canada
Posts: 3,791
Likes: 0
Received 3 Likes
on
3 Posts
We're picking up two new hoists this week, along with a new crazy big parts washer too.....so yeah, we're not completely set-up and running yet. But getting there
#12
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Nice place Joe..I Hope you get up My way In the Near Future.I have an Idea on A Rear Spoiler.I have the Old Pieces,but I am lookin to get it done in ONE Piece...somehow..(heh,heh.)
#19
1/1 scale Hot Wheels
iTrader: (1)
Originally Posted by R.P.M.
We are also getting into the fabrication side of things as well as retailing new products from other companies. Here is where you (the consumer) comes in.....what do you guys want fabricated for your cars? Tell us and we can either one-off fab it or possibly put it into production. More details of this sort of thing once our new website is going.
a good looking and functional cold air intake design to go along with your porting would be nice.
#21
Likes to swear....alot
Thread Starter
iTrader: (3)
Join Date: Dec 2002
Location: Kitchener Ontario Canada
Posts: 3,791
Likes: 0
Received 3 Likes
on
3 Posts
Hevnsnt, I'll be around pretty much all day Saturday if you want to check it out.
misterstyx69, soulja77 and j_man1100, we weren't really thinking of body parts to fabricate, but it is an option. We'll see what our carbon fibre guy can do with hoods first
no_name, thats what we were thinking, an all aluminum powdercoated strut bar for all three generations....dont go buying any old strutbars just yet. We'll have something for ya by summer.
misterstyx69, soulja77 and j_man1100, we weren't really thinking of body parts to fabricate, but it is an option. We'll see what our carbon fibre guy can do with hoods first
no_name, thats what we were thinking, an all aluminum powdercoated strut bar for all three generations....dont go buying any old strutbars just yet. We'll have something for ya by summer.
#23
Banned. I got OWNED!!!
iTrader: (2)
Looking good ... you only about an hour away from me now i'll drop by once i'm semi done this my car to come and show it off. As for the hoist I was going to same the same thing lol. Out of curiosity how much does a hoist cost? It would really be nice to have my garage lifted up a bit and sticking a hoist in there ...
#24
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Join Date: Jun 2001
Location: London, Ontario, Canada
Posts: 3,106
Likes: 0
Received 0 Likes
on
0 Posts
Wow that's a heck of a "shop." When did they move out the jet?
Welcome to civilization. Hint: Red means stop, green means go.
Time machine.
Welcome to civilization. Hint: Red means stop, green means go.
Originally Posted by R.P.M.
What do you guys want fabricated for your cars?