Project - members FD
05-11-06, 01:17 PM
#2
The pics of the holes are before and after's of the rear wiper and rear squirter on the hatch.......the hood squirters still need to have the aluminum panel bonded, that will happen tonite.
The car will be ready for the spot priming tomorrow - wheel wells are getting rolled today - and there is only a couple more minor dents to level out before it gets its primer.
The car will be ready for the spot priming tomorrow - wheel wells are getting rolled today - and there is only a couple more minor dents to level out before it gets its primer.
Trending Topics
05-12-06, 09:35 AM
#11
Originally Posted by jim kutschke
Looks good Joe....I'll try and stop by on Staurday
05-12-06, 12:37 PM
#12
Former Rx7 *****
Join Date: Nov 2001
Location: Mississauga
Posts: 4,534
Likes: 0
Received 0 Likes
on
0 Posts
Joe,
What is your business phone number? I"m interested in getting some body work done.
-Mainly to straight or replace the rad support.
-Strip old paint from spare S5 bumper, paint it white, install.
-Straighten out whatever is not straight.
-Remove bad bondo job on passenger lower fender or replace with a new fender. -Pull out door dings.
-Fill in hole where power antenna went through.
-Paint and install a Feed Front Lip
You or I can supply parts. I got a mazdaspeed motorsports sponsorship...
basically fix all the f'ups from bad body shops the car has seen in it's 17 year life.
Can you give a bunch of buisness cards to Jim? I'll swing by and grab one from him later.
What is your business phone number? I"m interested in getting some body work done.
-Mainly to straight or replace the rad support.
-Strip old paint from spare S5 bumper, paint it white, install.
-Straighten out whatever is not straight.
-Remove bad bondo job on passenger lower fender or replace with a new fender. -Pull out door dings.
-Fill in hole where power antenna went through.
-Paint and install a Feed Front Lip
You or I can supply parts. I got a mazdaspeed motorsports sponsorship...
basically fix all the f'ups from bad body shops the car has seen in it's 17 year life.
Can you give a bunch of buisness cards to Jim? I'll swing by and grab one from him later.
Last edited by Cheers!; 05-12-06 at 12:39 PM.
05-23-06, 06:06 PM
#17
I am a Newbie
Join Date: Mar 2006
Location: Ottawa
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Can't really tell from the picture, but did you just fill that antenna hole with bondo? If so you will be sorry. It needs to have a metal patch welded first and then bondo it. Otherwise in one to two years the moisture will get into it and rust will begin to show through. Autobody rule of thumb is... if it is a hole weld it... if it is a dent fill it with bondo.
05-23-06, 06:18 PM
#18
Originally Posted by DonQuixote
Can't really tell from the picture, but did you just fill that antenna hole with bondo? If so you will be sorry. It needs to have a metal patch welded first and then bondo it. Otherwise in one to two years the moisture will get into it and rust will begin to show through. Autobody rule of thumb is... if it is a hole weld it... if it is a dent fill it with bondo.
05-23-06, 06:40 PM
#21
Originally Posted by Cheers!
I like. I wonder if Jim will still drive the car in the rain.
ps. I need a ride to pick it up on Thursday...you around?
Last edited by JDK; 05-23-06 at 06:43 PM.
