My wife asked for my Christmas list. I am sure this is not what she had in mind, but it saves me from collecting it The only part I am missing from my list ( that I can think of ) is a water methanol kit. I want a kit that has built in safety to dump boost if things go wrong. Any suggestions on a kit, or different parts below?


These three go together
http://www.pettitracing.com/rx7/index_brakes.htm $299 - I want them slotted, AND cross drilled
http://www.rx7store.net/product_p/hawkfdhps%20front.htm $58
http://www.rx7store.net/product_p/hawkfdhps%20rear.htm $58

These next two go together
http://www.rx7store.net/product_p/actprolitefd.htm $265
http://www.pettitracing.com/rx7/index_driveline.htm $125 -Counterweight

http://www.rotary-works.com/mm5/merc...gory_Code=THBD $395

http://www.drainplugmagnets.com/mazda.php $29.95



BLACK SOCKS!!!

UNDERWEAR

 

Get a presilencer to replace that cat :P

As for brakes consider waiting for a BBK. I tried doing the whole rotor + lines + pad thing before and it didn't really make a difference. If you want something now, get just the steel braided lines since the BBK's don't come with rear lines anyway. Unless your in a need of brake replacement, thats a different story.

Cheaper Drain plug...

http://cgi.ebay.com/ebaymotors/MAGNE...item2c5905f1cd

If your going to order anything from rx7store soon, send me a PM and we can order some stuff together.

thewird

 

The car shakes pretty badly when try to slow it down from high speeds. While I am not tracking the car and do not need top of the line brakes I would like them to be functional, and look decent.

Good point on the exhaust. I am going to take a picture of the current exhaust. I know Charn had some custom work done to it. I am wondering if I can get by with just a mid pipe ( not resonated )........

 

You just need to buy a muffler to replace the cat since you already have 3 inch piping. The car will be loud with a straight pipe.

If the car is vibrating under braking, it means your rotors are warped so you can either machine them if there thick enough or replace the rotors.

thewird