Lets see your Rx7's or rotary powered car
#227
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Thanks Joe.
Yep, got the rims for this season. I was lucky to find a forum member who wanted to get rid of them.
Car looks alot better with the 17's.
She's almost done.... just a few more parts and she'll be complete!
Yep, got the rims for this season. I was lucky to find a forum member who wanted to get rid of them.
Car looks alot better with the 17's.
She's almost done.... just a few more parts and she'll be complete!
#231
Full Member
Join Date: Jan 2007
Location: brampton, Ontario
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
hey just bought my first fd this is a list of parts the importer gave to me on whats on the car.
-td04 turbo
-filter kit for oil gauge
-greddy intake manifold
-trust intercooler
-hks intake
-trust engine bay core support
-d1 mirrors
-cwest front bumper
-rays mazdaspeed rims
-kakimoto exhaust
-sloted rotors
-cwest gt wing
-recardo racign seat
-4pt racing harness
-turbo timer
-speedo/0-400km electronic timer<dont know what that is my speedo only goes up to 180
-apexi power fc
omoni oil,water,and oil pressure gauge built in to dash
-td04 turbo
-filter kit for oil gauge
-greddy intake manifold
-trust intercooler
-hks intake
-trust engine bay core support
-d1 mirrors
-cwest front bumper
-rays mazdaspeed rims
-kakimoto exhaust
-sloted rotors
-cwest gt wing
-recardo racign seat
-4pt racing harness
-turbo timer
-speedo/0-400km electronic timer<dont know what that is my speedo only goes up to 180
-apexi power fc
omoni oil,water,and oil pressure gauge built in to dash
#233
Full Member
Join Date: Jan 2007
Location: brampton, Ontario
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
#235
Senior Member
Join Date: Nov 2006
Location: Airdrie, Alberta
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Here are some pics of my car. I just finished polishing it up a bit, but it's now too hot to wax it so that will have to wait til later. I also took some pics of the flaws in the body since there was a few people interested in what kind of shape the car would be in.
#237
Introduction
Jealous much? Hayl, yeah! All of these rides are rotortastic!
I'm an MOTM virgin, but I plan to remedy that this year. Hope to run into some of you guys August 11th at Cayuga Raceway!
no_name: LOVE your 1st gen. DROOOOL
L
I'm an MOTM virgin, but I plan to remedy that this year. Hope to run into some of you guys August 11th at Cayuga Raceway!
no_name: LOVE your 1st gen. DROOOOL
L
#239
You better sit down for this - I drive a Caravan. Not kidding. It was free. Yeah. <blush> <ducks>
I'm actively (seriously) shopping.
I am committed to pick-up an '83 RX-7 in Parry Sound next Sunday... unless a tree falls on it or something before I get there. Unfortunately, I will be taking it home on a trailer and I may not be driving it for a bit, because I honestly don't know what shape it's in. I suspect it will pass a safety, but I don't really know how it runs. I had it started, but it was revving sooo high and as soon as I took my foot off the gas, it stalled.
Needless to say, I'm reading posts in this forum like crazy. There's tons of information and I just can't read fast enough. : )
MOTM - attendance, check.
Is it bad to have this conversation in the picture-posting forum?
L
#240
Full Member
Join Date: Mar 2007
Location: Huntsville, Ontario
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
I'm 18 years old, this is my summer project (and extremely deep money pit). Wont need much to get it going, although I'll likely keep it bone stock as I'm in it for the car, not the performance. Not to rag on anyone else though, I've seen a lot of beautifully done cars in this thread!
This was after I took off the shitty wheel temp job and put originals on, hence the mess.
Not too bad.
Yay for a reasonably clean interior!
This was after I took off the shitty wheel temp job and put originals on, hence the mess.
Not too bad.
Yay for a reasonably clean interior!
#241
Full Member
Join Date: Aug 2007
Location: Bradford, ON
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Nice lookin RX7 Frogblender
Here's a couple pics of my '83 RX7. Needs a little TLC (and a running engine). This car belonged to my Dad who passed away earlier this year, and is the same vehicle I got my drivers license in mid 80's.
Here's a couple pics of my '83 RX7. Needs a little TLC (and a running engine). This car belonged to my Dad who passed away earlier this year, and is the same vehicle I got my drivers license in mid 80's.
#248
Junior Member
Join Date: Aug 2002
Location: Kitchener Ontario
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Here is my FC 1989 GX
Hi everyone, great shots of all 3 generations of RX-7.
Here are a couple of mine.
Mostly stock except for new AGX struts and Eibach springs.
Doesn't see any snow.My son helps me maintain the car and wants the car after he graduates from University.
Thanks Paul
Here are a couple of mine.
Mostly stock except for new AGX struts and Eibach springs.
Doesn't see any snow.My son helps me maintain the car and wants the car after he graduates from University.
Thanks Paul
#249
Newbie
Join Date: Sep 2007
Location: Regina, SK, Canada
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
My Poor FC From Saskatchewan, Regina =[
Plz Check Out My 88 FC And Feel Free To Give Ur Ideas , Like What Would U Have Done To It If It Was Urs , thx
Soon Im Gonna Make It Like The FC In Middle
Soon Im Gonna Make It Like The FC In Middle