Canadian Forum Canadian users, post event and club info here.

Fuel injectors

Thread Tools
 
Search this Thread
 
Old Nov 17, 2005 | 09:15 PM
  #1  
jwelder's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 87
Likes: 0
From: Medicine Hat, Alberta, Canada
Fuel injectors

What is the best fuel injectors for a stock T11 with no mods
Reply
Old Nov 17, 2005 | 10:41 PM
  #2  
rx_prez's Avatar
got paint?
Tenured Member 05 Years
 
Joined: Oct 2004
Posts: 590
Likes: 0
From: Ottawa, Canada
Originally Posted by jwelder
What is the best fuel injectors for a stock T11 with no mods
stock fuel injectors (which are 550cc, high or low impedance depending on exact model year and a bit of randomness)
Reply
Old Nov 18, 2005 | 01:11 AM
  #3  
jwelder's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 87
Likes: 0
From: Medicine Hat, Alberta, Canada
Ok but if you were replacing them what would be the best to go to??
Reply
Old Nov 18, 2005 | 02:59 AM
  #4  
doridori-rx7's Avatar
Navy MarCom
Tenured Member 05 Years
iTrader: (3)
 
Joined: Jul 2004
Posts: 812
Likes: 0
From: On a Boat!
stock injectors..

you could spend all sorts of money and get SARD/ND/RC eng. .. but to what end?

if you want to give money away I'm sure lots of people here would accept it..
Reply
Old Nov 18, 2005 | 03:04 AM
  #5  
rick_tj's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 940
Likes: 0
From: Ontario
Moreover, where would you send your stock injectors to be cleaned/rebuilt and flow tested?
Reply
Old Nov 18, 2005 | 10:40 AM
  #6  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
rick_tj, since you are in the London area I recommend Roy's Diesel. They've always been good to me.
Reply
Old Nov 18, 2005 | 12:26 PM
  #7  
Terrh's Avatar
STUCK. I got SNOWNED!!!!!
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: Mar 2002
Posts: 8,737
Likes: 20
From: Windsor, On
I can second roy's diesel!
Reply
Old Nov 18, 2005 | 05:10 PM
  #8  
RXciting's Avatar
GrapefruitRacing?
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 2,155
Likes: 0
From: PartSource
Originally Posted by jwelder
Ok but if you were replacing them what would be the best to go to??

Why replace them. It would be easier and cheaper to just get them cleaned.

Also if you go with bigger injectors on the stock system you would need some way to control them (SAFC, Standalone w/e ) otherwise you will run very rich. Even more so then stock.

If you cannot find a place to clean your injectors i have a set of S4 TII injectors (550cc's) that i am selling pm me if interested.

Frank
Reply
Old Nov 28, 2005 | 04:40 PM
  #9  
jwelder's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 87
Likes: 0
From: Medicine Hat, Alberta, Canada
How much??
Reply
Old Nov 28, 2005 | 07:29 PM
  #10  
Archangels's Avatar
- Make Haste -
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 1,648
Likes: 0
From: Calgary, Alberta
i have a set of low imped 680cc injectors that were professionally cleaned....

$150cdn for both
Reply
Old Nov 28, 2005 | 11:56 PM
  #11  
Syritis's Avatar
Can Post Only in New Member Section
iTrader: (2)
 
Joined: Jul 2004
Posts: 930
Likes: 0
From: Calgary, Canada
Weird that U've upped to 720cc secondaries, and i stll have 680's. I'm still runnign rich though. damn turbo.

order of fuel mods:
1. 550cc primary and secondaries
2. 550cc primaries and 680/720cc secondaries
3. 550cc prim and 680/720cc second with FMS
4. whatever variation of injectors with standalone EMS

Now pick a number between 1 and 4 for how much work has been done to ur car.

1. stock
2. intake and exhaust.
3. intake exhaust and internals
4. big single turbo.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
EfiniGirl
Haltech Forum
2
Sep 1, 2015 09:31 PM
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM




All times are GMT -5. The time now is 02:00 AM.