Feeler: 1987 Turbo II
#1
Rotary Enthusiast
Thread Starter
Join Date: May 2005
Location: Vernon, BC
Posts: 1,135
Likes: 0
Received 0 Likes
on
0 Posts
Feeler: 1987 Turbo II
just hoping for some offers on my project. Ive simply run out of time, and ive got to move up to Dawson Creek and have to buy a truck
1987 TII
Silver with Grey Interior
179000km on body
40-50,000 k on motor (premixed since rebuild)
Strong boost, blitz BOV
Front and rear corksport strut bars
new tires
News pads, rotors, rebuild calipers, new master cylinder, stainless brake lines (corksport)
Aftermarket sony MP3 stereo
straight 3/4" downpipe and midpipe into stockish dual cans
rebuilt and flow tested injectors
K&N filter
all new rad hoses, fuel filter, plugs, wires, and other tune up stuff!
brand new stereo surround! woo!
It had some small spots of rust on the body, and I am half done fixing them. the car is halfish primed with epoxy primer.
runs very well. pulls VERY hard. I would estimate 250-300hp. with what ive got done. boost runs about 10psi
I know theres more done to the car, I just want a general idea..
I paid 3300 for the car before any of the above was done.
1987 TII
Silver with Grey Interior
179000km on body
40-50,000 k on motor (premixed since rebuild)
Strong boost, blitz BOV
Front and rear corksport strut bars
new tires
News pads, rotors, rebuild calipers, new master cylinder, stainless brake lines (corksport)
Aftermarket sony MP3 stereo
straight 3/4" downpipe and midpipe into stockish dual cans
rebuilt and flow tested injectors
K&N filter
all new rad hoses, fuel filter, plugs, wires, and other tune up stuff!
brand new stereo surround! woo!
It had some small spots of rust on the body, and I am half done fixing them. the car is halfish primed with epoxy primer.
runs very well. pulls VERY hard. I would estimate 250-300hp. with what ive got done. boost runs about 10psi
I know theres more done to the car, I just want a general idea..
I paid 3300 for the car before any of the above was done.
#2
Got Rotors?
Join Date: Mar 2002
Location: cambridge, Ontario, Canada
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
I am not sure how this setup translates into +250 HP unless you are not listing a bunch of mods like exhaust, FCD or some type of fuel controller, bigger injectors, etc. From what is listed here you would be looking more like stock numbers under 200HP.
#3
Reppin' the Burbs
iTrader: (8)
Join Date: Oct 2005
Location: Tottenham, Ontario
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jono20
just hoping for some offers on my project. Ive simply run out of time, and ive got to move up to Dawson Creek and have to buy a truck
1987 TII
Silver with Grey Interior
179000km on body
40-50,000 k on motor (premixed since rebuild)
Strong boost, blitz BOV
Front and rear corksport strut bars
new tires
News pads, rotors, rebuild calipers, new master cylinder, stainless brake lines (corksport)
Aftermarket sony MP3 stereo
straight 3/4" downpipe and midpipe into stockish dual cans
rebuilt and flow tested injectors
K&N filter
all new rad hoses, fuel filter, plugs, wires, and other tune up stuff!
brand new stereo surround! woo!
It had some small spots of rust on the body, and I am half done fixing them. the car is halfish primed with epoxy primer.
runs very well. pulls VERY hard. I would estimate 250-300hp. with what ive got done. boost runs about 10psi
I know theres more done to the car, I just want a general idea..
I paid 3300 for the car before any of the above was done.
1987 TII
Silver with Grey Interior
179000km on body
40-50,000 k on motor (premixed since rebuild)
Strong boost, blitz BOV
Front and rear corksport strut bars
new tires
News pads, rotors, rebuild calipers, new master cylinder, stainless brake lines (corksport)
Aftermarket sony MP3 stereo
straight 3/4" downpipe and midpipe into stockish dual cans
rebuilt and flow tested injectors
K&N filter
all new rad hoses, fuel filter, plugs, wires, and other tune up stuff!
brand new stereo surround! woo!
It had some small spots of rust on the body, and I am half done fixing them. the car is halfish primed with epoxy primer.
runs very well. pulls VERY hard. I would estimate 250-300hp. with what ive got done. boost runs about 10psi
I know theres more done to the car, I just want a general idea..
I paid 3300 for the car before any of the above was done.
He does list exhaust and injectors, just not what size they are... still funny with no piggyback
Thread
Thread Starter
Forum
Replies
Last Post