Driver_WT

iTrader: (1)

I use my FD on the street and for track days. Track days are the most important use. Looking for some advice on front and rear alignment specs as I am getting the alignment done this week. Tires are 275/35/18 all the way around. Fortune Auto Coilovers all around.

Thanks.

Wade

Natey

iTrader: (19)

https://www.rx7club.com/3rd-gen-arch...0/#post3645765

thewird

iTrader: (8)

I like a little bit of toe in in the rear but thats just me ^_^

thewird

Natey

iTrader: (19)

Maybe a pinky finger if I'm drunk enough but never a toe.

Driver_WT

iTrader: (1)

Got the alignment completed. Camber is -1.5 front and rear, thrust angle is 0, rear toe is 0", front toe is between 1/16" and 1/8". I wanted the front caster to be 6 degrees, but could only get 6.8 degrees on one side and 7.4 degrees on the other side.

What effect will the increased caster have on handling?

Thanks.

Wade