Simple Question
Is it possible to assemble a rotary engine out of step with the counter weight?
I have a shake in the engine, I think it is fuel injection on MS2 but I am trying to rule out all possibilities. The engine has run for 5 hours on a test stand before it was put in the car. Ark1. |
Originally Posted by Ark1
(Post 11478010)
Is it possible to assemble a rotary engine out of step with the counter weight?
I have a shake in the engine, I think it is fuel injection on MS2 but I am trying to rule out all possibilities. The engine has run for 5 hours on a test stand before it was put in the car. Ark1. |
Thanks for the reply
Originally Posted by victomaru
(Post 11478201)
the counter weights can only be put on one way so it shouldnt be off balance unless you put the wrong weight on or the flywheel could be off balance also i think if you change flywheels to aluminum or t2 or n/a they have different counter weights for the different weights flywheels. if you havent checked the e-shaft end play the shaking could be your E-shaft going back and forward in the engine. you should probably post this in the rotary tech section for better answers
Thank you. Ark1. |
would probably be best if you described this "shake" a little more. if you can, post a video of it.
also, just curious ... why did you post this thread here? |
Thread Location.
Originally Posted by diabolical1
(Post 11478224)
would probably be best if you described this "shake" a little more. if you can, post a video of it.
also, just curious ... why did you post this thread here? Ark1. Here is the You Tube Video of the engine running in the car. I will post in the Tech Section as well. |
Originally Posted by Ark1
(Post 11478493)
I will post in the Tech Section as well.
for some reason the video link is not working for me (admittedly, I've been having computer issues lately, but I can still play other Youtube videos. bottomline is I haven't seen your video yet. |
Try this Thread.
Originally Posted by diabolical1
(Post 11478823)
no need. just contact the moderator for this section and have them move it somewhere more appropriate.
for some reason the video link is not working for me (admittedly, I've been having computer issues lately, but I can still play other Youtube videos. bottomline is I haven't seen your video yet. See this thread. https://www.rx7club.com/megasquirt-f...shaky-1036374/ Ark1 |
All times are GMT -5. The time now is 07:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands