sub
|
I made a mistake when building the ITB setup, not enough room for a heatshield between the tps bracket and exhaust, only way i can see of fixing it it to bend the manifold upwards. I'm not shure what i'm going to do, but i'm considering just running a modified 6 port lim and just take my time making the next version of the itb, and not rush it like i did this time.
Need to get it back on the road so i don't loose all my motivation. |
nice!
|
|
8 Attachment(s)
Mounted the new engine, it runs fine. When i was out running in the engine, i hit a bit of ice on the road with some water on top and went into the guard rails on the other side. So i parked the car and bought a DD, a Mitsubishi carisma (boring car wich i'm not going to start throwing money into).
Checked the front suspension and steering, everything seems to be in good condition, i also changed from 4-5bolt hub's in the front, easyer to find wheels with 5*114,3 than 4*114,3. /DSC_0659_zps3f2b281e.jpg.html]Attachment 675442[/URL] Straightened out both front fenders today, considering using the car as a track only car, if i do that the fenders are good enough, just needs som sanding, bondoe and paint. Attachment 675443 Attachment 675444 Attachment 675445 Attachment 675446 Attachment 675447 Attachment 675448 Attachment 675449 |
4 Attachment(s)
Started taking out the interior to shed some weight and in preparation of things to come..
Attachment 675364 Attachment 675365 Attachment 675366 Attachment 675367 |
looking good!!!!!
|
2 Attachment(s)
|
4 Attachment(s)
|
4 Attachment(s)
|
1 Attachment(s)
Bought some used 7.5"et38/8"et35 x 17" rims, so now i just need to get some tires on one of the sets and then i can finish the 5 bolt conversion.
Attachment 672893 |
6 Attachment(s)
|
4 Attachment(s)
|
4 Attachment(s)
|
8 Attachment(s)
|
4 Attachment(s)
|
5 Attachment(s)
|
7 Attachment(s)
Upgraded fuel system and removed some wires that no longer where connected to anything.
Old system: 4*460cc stock denso injectors and stock fpr. New system: 2* ID1000 injectors and AEM fpr, with some AN fittings. Attachment 667069 Attachment 667070 Attachment 667071 Attachment 667072 Attachment 667073 Attachment 667074 Attachment 667075 |
hello my neighbour from norge! cool build nice that your getting it all back to one colour again! you seem very quick at whipping engines in and out as well =) i noticed that you had block off plates on both of your engines. was that your acv? im really having trouble working it out from everything on the net cos i have a swedish-sold s4 n/a seems to have minor differences compared to the american versions. i put up a pic on my thread.
https://www.rx7club.com/build-thread...1030202/page5/ any help is appreciated so that i can maybe get my ass over to norway and get left behind by you on the track hehe =P |
2 Attachment(s)
Painted the rear bumper, mirrors and gas cover, so eksterior is more or less done for now.
Attachment 666421 Attachment 666422 |
4 Attachment(s)
Got plates back on the car, atleast for a couple of months, feels great driving it around again :D
Ran a little rich, around 10 AFR. I have adjustet it a little and it now runs around 12 AFR at idle, and runs good enough now for me to get it to a friend with a dyno, so i can get it properly tuned and see what kind of power i will have to play with :) Attachment 665389 Attachment 665390 Attachment 665391 Also got some tires, hope it doesn't rain at the track day in three weeks time :D Attachment 665392 |
1 Attachment(s)
|
1 Attachment(s)
Aerokit Spec D +20mm fenders to replace my dented stock ones :D Hoping to get them fitted to the car in my Easter vacation :D
Attachment 651819 |
10 Attachment(s)
Started over to build an itb manifold, using aluminum this time. Just used simple tools to cut the flange and so on, so it's not going to be the best looking intake, but it should hopefully perform good. First time i ever welded aluminum, so i'm learning as i go.
Attachment 629683 Attachment 629684 Attachment 629685 Attachment 629686 Attachment 629687 Attachment 629688 Attachment 629689 Attachment 629690 Attachment 629691 Attachment 629692 |
3 Attachment(s)
|
All times are GMT -5. The time now is 09:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands