My Attempt at a clean DD 90 GXL

Thread Tools
 
Search this Thread
 
Old Mar 24, 2014 | 02:09 PM
  #26  
labuffness's Avatar
Thread Starter
what money?
 
Joined: Nov 2013
Posts: 90
Likes: 1
From: Martinsburg, WV
Ok so I got the seats in. Never knew that getting aftermarket seat brackets in would be such a PITA. They sit really high but I'm going to get my uncle to maybe cut them up and modify them to make the seats sit lower. But overall I am happy and they are very comfortable.

My Attempt at a clean DD 90 GXL-image-15085992.jpg



My Attempt at a clean DD 90 GXL-image-3831242173.jpg



My Attempt at a clean DD 90 GXL-image-3707710879.jpg


The next step is to find a spot where I can mount the harness bar for the harnesses.
Reply
Old Mar 24, 2014 | 02:20 PM
  #27  
blackedoutFC3S's Avatar
HKS obsessed
Tenured Member 10 Years
iTrader: (7)
 
Joined: Mar 2008
Posts: 1,529
Likes: 0
From: OP, KS
Those look great but man It would drive me crazy rubbing on the headliner like that.

I found these the other day they've gotten great reviews from what I've read going to try them out when I get enough money for seats and a cage.Low Seat Sliders
Reply
Old Mar 24, 2014 | 02:49 PM
  #28  
MaczPayne's Avatar
Mac Attack
Tenured Member 15 Years
iTrader: (5)
 
Joined: Dec 2005
Posts: 5,668
Likes: 22
From: California
Holy *****, 500 for a set?
Reply
Old Mar 24, 2014 | 03:02 PM
  #29  
labuffness's Avatar
Thread Starter
what money?
 
Joined: Nov 2013
Posts: 90
Likes: 1
From: Martinsburg, WV
Originally Posted by MaczPayne
Holy *****, 500 for a set?
Yeah... I'm just gonna roll with mine, and I have to I'll get someone to fab completely new ones.. Seat rails are so overpriced.
Reply
Old Mar 24, 2014 | 10:21 PM
  #30  
wankle1's Avatar
93' BB R1
Tenured Member 10 Years
iTrader: (2)
 
Joined: Apr 2009
Posts: 183
Likes: 2
From: wyoming
You said the roads there get nasty in the winters? i recommend putting a bit of anti-seize on the threads when you go to put the coilovers in. I had to raise my car up this winter for my snow tires and it was seized together. had to leave it outside in the -20 degree weather and then hit it with a torch and a hammer to get it apart. Great build though, after you get those coilovers on it will make the biggest difference. i hate my winter setup because it sits about 2 1/2" higher than it does in the summer, and i think it makes my car look ugly haha.
Reply
Old Mar 24, 2014 | 10:32 PM
  #31  
labuffness's Avatar
Thread Starter
what money?
 
Joined: Nov 2013
Posts: 90
Likes: 1
From: Martinsburg, WV
Originally Posted by wankle1
You said the roads there get nasty in the winters? i recommend putting a bit of anti-seize on the threads when you go to put the coilovers in. I had to raise my car up this winter for my snow tires and it was seized together. had to leave it outside in the -20 degree weather and then hit it with a torch and a hammer to get it apart. Great build though, after you get those coilovers on it will make the biggest difference. i hate my winter setup because it sits about 2 1/2" higher than it does in the summer, and i think it makes my car look ugly haha.
Thanks for the tip man, but yeah I'm pretty excited to get them on. And I agree. Wheel gap= ugly car
Reply
Old Mar 25, 2014 | 12:13 AM
  #32  
Stringbean's Avatar
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Apr 2012
Posts: 84
Likes: 0
From: Prince George, BC, Canada
Those are some super sexy coils! and damn i want that lip so bad. gotta save pennies (which I'm terrible at) I just bought a S5 front number, crash bar with fog lights so I'm in the midst of changing from s4 to s5 and then I'm getting the lip and roof spoiler and a diffuser from shine auto. Loving the car man! That lip makes the s5 front end so worth in for my sake in the end! s4 is pretty, s5 has got a bit of down-syndrome but with the lip its pure sex!. keep it coming man! BTW coil over install is super easy! i did my teins in like 2 hours! GET TO IT!
Reply
Old Apr 2, 2014 | 01:43 PM
  #33  
labuffness's Avatar
Thread Starter
what money?
 
Joined: Nov 2013
Posts: 90
Likes: 1
From: Martinsburg, WV
Ok so today I finally had the time and weather permitting to clean my interior up a little. I got the harnesses just about where I want them, although I still need to do a little more modification. But here are some pics of the interior cleaned up today.

Name:  002_zpse5fbac74.jpg
Views: 125
Size:  85.9 KB

Name:  004_zps59b50bc3.jpg
Views: 119
Size:  84.9 KB

This weekend the coilovers will FINALLY go in. I will return with updates then.
Reply
Old Apr 2, 2014 | 09:03 PM
  #34  
clokker's Avatar
Cake or Death?
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 10,249
Likes: 64
From: Mile High
I'm confused about what's going on with the harnesses.
What are the shoulder straps going to attach to?
Reply
Old Apr 2, 2014 | 09:30 PM
  #35  
labuffness's Avatar
Thread Starter
what money?
 
Joined: Nov 2013
Posts: 90
Likes: 1
From: Martinsburg, WV
Originally Posted by clokker
I'm confused about what's going on with the harnesses.
What are the shoulder straps going to attach to?
They are attatched via a hole right behind where the bolts that hold the bins are located. The angle of the belts is close to a 45 degree angle, but i believe it will be ok.
Reply
Old Apr 2, 2014 | 11:27 PM
  #36  
clokker's Avatar
Cake or Death?
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 10,249
Likes: 64
From: Mile High
I've never seen such an arrangement (is there another buckle/snap/latch in the back?) but sorry, it doesn't look "ok" at all.
Just to start, I believe that @10° is the max below horizontal allowed for the shoulder strap mounts.
Reply
Old Apr 2, 2014 | 11:53 PM
  #37  
labuffness's Avatar
Thread Starter
what money?
 
Joined: Nov 2013
Posts: 90
Likes: 1
From: Martinsburg, WV
Originally Posted by clokker
I've never seen such an arrangement (is there another buckle/snap/latch in the back?) but sorry, it doesn't look "ok" at all. Just to start, I believe that @10° is the max below horizontal allowed for the shoulder strap mounts.
There is a bracket at the bottom that bolts to the floor. And the paper says that the shoulder belts shouldn't exceed a forty-five degree angle. So I'm pretty sure I'm good... I understand that it's all about safety but I think I'll be fine.
Reply
Old Apr 5, 2014 | 12:35 AM
  #38  
DaBrkddy's Avatar
Smells like 2 stroke.
Tenured Member: 15 Years
 
Joined: Nov 2006
Posts: 527
Likes: 20
From: Misery
It really is all about safety... Racing seats and harnesses aren't supposed to be for looks.
Reply
Old Apr 5, 2014 | 06:15 AM
  #39  
labuffness's Avatar
Thread Starter
what money?
 
Joined: Nov 2013
Posts: 90
Likes: 1
From: Martinsburg, WV
Originally Posted by DaBrkddy
It really is all about safety... Racing seats and harnesses aren't supposed to be for looks.
I understand that. I meet all the requirements according to the manufacturer. And this is temporary setup until I find the bolt in location for a harness bar to decrease the angle of the shoulder straps.
Reply
Old Apr 10, 2014 | 01:00 PM
  #40  
labuffness's Avatar
Thread Starter
what money?
 
Joined: Nov 2013
Posts: 90
Likes: 1
From: Martinsburg, WV
The coilovers finally got installed so i decided to take some pics.

Name:  _MG_5040_zpsa570158f.jpg
Views: 112
Size:  70.9 KB

Name:  _MG_5034_zpse9941e44.jpg
Views: 131
Size:  65.2 KB

Name:  _MG_4974_zpsfa27f3c5.jpg
Views: 118
Size:  39.1 KB
Reply
Old Apr 17, 2014 | 10:18 PM
  #41  
Big88chevy's Avatar
Brappidy Brap
Tenured Member 15 Years
iTrader: (5)
 
Joined: Mar 2007
Posts: 504
Likes: 0
From: South Jersey
If u ever feel like u need a break from the fc, I want u to know I'm here to help. I would gladly take possession of it for you for a couple days... Or months........ Maybe years lol.
Reply
Old Feb 12, 2015 | 01:58 AM
  #42  
labuffness's Avatar
Thread Starter
what money?
 
Joined: Nov 2013
Posts: 90
Likes: 1
From: Martinsburg, WV
Well I said it wasn't going to happen..but it did. With this thing called life, I seem to have slipped away from this forum again. I owe you all A LOT of updates. So I guess we will start off with the new wheels.
Name:  image6_zpszxp1ryf4.jpg
Views: 126
Size:  193.9 KB

Lets just say I made em work.

I guess before that I can say that I added a few things like skirts and rear caps to the car... the lip that I added got destroyed when I used to be on 17s..

So i just drove the whole summer of 2014. But after a while, I changed the way I wanted the car to look. I want my car to look straight out of the street/sexy style japanese culture. I just want people to see my car and be like man... I can see where his influences came from.

Anyway I drove her a lengthy 6 hours to h20i (yes i know its a vw show but hey i like to party too). I decided that the car wasnt low enough (dumb) so i lowered it more than its ever been and tighened up that suspension and made the haul (mistake). First on the way down I hit a chunk of ashpalt right off the Bay Bridge... Destorying my front lip that I just reglassed and painted.. Was mad, but not that mad, coulda been way worse.
So anyway we get down there and I drive in the rain with no wipers (dumb) and say to hell with it ill wait till the weather clears up. So it finally does and i go to get breakfast about a hundered streets away from my hotel.. and my tools. Go to leave Dennys and my clutch master bites the dust.. Skip all the advance auto bs and tryin get a master and needless to say that the ol man came through and hauled a trailor down to come get her.. Was super bummed cause I got tons of offers while down there to be featured in multiple things but hey thats life
Name:  image5_zpsaoyvtj5n.jpg
Views: 106
Size:  91.5 KB

Anyway I got her back home and fixed her up and drove it until it was freezing *****.

Got it fixed and got a few pics before winter set in.
Name:  image1_zpspfmtctul.png
Views: 114
Size:  802.0 KB

Name:  image4.png_zpszzh5hp5p.jpeg
Views: 247
Size:  156.0 KB

Name:  image3_zpss27u0ppx.png
Views: 111
Size:  626.8 KB

Anyway shes in the garage now getting a few new things. Ill post more pics as I advance in progress. (promise)
Reply
Old Aug 21, 2015 | 12:34 PM
  #43  
labuffness's Avatar
Thread Starter
what money?
 
Joined: Nov 2013
Posts: 90
Likes: 1
From: Martinsburg, WV
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
doritoloco
Introduce yourself
4
Sep 8, 2015 07:58 PM




All times are GMT -5. The time now is 02:24 AM.