i think reason your car stands out is because it is S4 , S5s kind of fall behind every other s5 or s4 in s5 clothing on the net haha
|
I think you're right, so I am keeping my front s4 bumper just in case I get tired of the new look. I wanted a more aggressive look so I'll see how it turns out, if I don't like it, I can go back easily.
|
G35 guards...
4 Attachment(s)
Originally Posted by _Mac_
(Post 10744209)
^I drilled a small hole and used a small screw to hold the rear part of the mudguard to the bumper. You can sorta see it in the pic below. Once finished and installed please do share pics!^
but I liked the lower look better so I made a bracket to attach the other wheel well hole to a pre existing hole... Paint (duplicolor color match) came out great, but the clear (duplicolor wheel clear) went on like shit. What clear did u use? I think I will try krylon acrylic next time as it goes on even and thin |
Thanks for posting that up! Glad to see someone else try it out, looks good.
As for the clear, if I use wheel paint clear I don't do it that heavy to where it comes out shitty. I just do light coats and then wetsand to get the shine. Duplicolor clear wheel paint is used on a few bumpers I have painted, its feels more solid than any other clearcoat I've tried. But with clear coat in general, I personally believe that it doesn't matter how you spray it on as long as it sticks because clear coat can be wetsanded and buffed. |
I completely agree that the wheel clear coats great and looks good when it lays down right; problem is it doesn't want to do so very often (at least not out of a can)
I'm starting to think that it has to do w/the extra high humidity down here. If I spray the wheel clear up close it turns white as it lays down, sometimes the bubbles disappear as it dries, sometimes they don't. Even wet sanding w/ 500 grit won't remove them before going through to the paint. If I spray far away it turns into a fuzz as it lands and really looks like trash, even if I take a tack cloth to it between coats. The krylon acrylic clear lays down much more even (albeit much thinner) and its actually possible to keep it from turning white or fuzzing up. I'll see how it looks once it dries, but it sprays 10x better... |
When laying down clear with wheel paint I do notice that it does turn a hazy white. I keep a heat gun on me for when it does. The heat gun cures it faster and gets rid of the white spots like magic, just don't heat it too much cause then the paint bubbles. I'll try to get up some pics of my bumper that I cleared with wheel paint after wetsanding.
|
Ah ha!! Well aren't you full of tricks, guess we just weren't gonna mention that minor detail huh? lol.
Checked out the krylon price, it looks good, not as glossy as the wheel clear, but its barely noticeable. I am probably gonna need a heat gun to help mold some bumper vents so I might try your technique the next time I need to paint something. Any updates on your bumper? |
2 Attachment(s)
Didn't know people were actually going to use wheel clear coat haha. Krylon is nice and cheap, it does lay down real well but it needs quite a few coats if you want to wetsand it after.
I know its not that clear of a shot, but its all I have. Attachment 717017 Finally got a shot with the rest of the team. Attachment 717018 |
Looks awesome. I just don't think it's as epic. Plenty of red GP kitted fcs
|
yup.
|
True.
Painting the trim black to match the s4 look might get some of the "epic" back. Btw how did you end up on a fwd/awd "team" where your vehicle is twice the avg age? Lol |
The shape of the fc stands out quite a bit with those guys. In a good way
|
its the only car with a low waist line.. They dont make cars like that anymore imo
|
I agree lol. The rx7 sticks out like a hot bitch in a world of women that wear mom jeans :nod:
http://3.bp.blogspot.com/_JrA6A_U4_R...omJeansSNL.jpg |
Yup, the only other car besides the 7 I can think of is the NSX
|
s13 240sx, fc3s, fd3s, nsx all have that low waist line.
Mac keep it s4 like this http://inlandempire.craigslist.org/cto/2554286222.html I know you can do it |
3 Attachment(s)
For some reason, I don't always get a notification saying someone posted in my thread so I check it once in a while and then theres like 10 posts haha.
Originally Posted by Brian_Reynolds123
(Post 10753170)
Looks awesome. I just don't think it's as epic. Plenty of red GP kitted fcs
Originally Posted by sharingan 19
(Post 10753327)
True.
Painting the trim black to match the s4 look might get some of the "epic" back. Btw how did you end up on a fwd/awd "team" where your vehicle is twice the avg age? Lol Me and my buddies s14 at Motion Auto Show 2011 in Long Beach, CA. The vendor we rolled in with wanted me to pop my hood. I told them it was stock motor, but they said it was clean so I said okay, you guys are in charge lol. Attachment 717019 Attachment 717020 Attachment 717021
Originally Posted by Hypertek
(Post 10756583)
s13 240sx, fc3s, fd3s, nsx all have that low waist line.
Mac keep it s4 like this http://inlandempire.craigslist.org/cto/2554286222.html I know you can do it |
Just a little bit more and it'll look like ilia's FC. :)
|
I'll take that as a compliment considering how much I love his fc haha
|
haha ok, well Welcome to the GP kit club, your one of us now <3 hahah
Nice your out at the shows, push the FC out there Good ride height, not as low as the RD cars Lets see how long this look lasts. =p |
sweet errrrrrrrrrrrr one is gonna want g35 muds now
|
1 Attachment(s)
funny you mention those, cause those look decent on quite a few cars haha
for example: (if you were wondering where my pair went, my buddies 14) Attachment 717022 |
Loving the GP bumper man it looks grest! What did you do to your shine bumper?
|
im just gonna throw it out there, you can love it or hate it. if you had the jdm window visors and maybe a roof spoiler, it would be on top of the world. but keep up the good work you should be in magazines.
|
just passed by your house. looks good down the street. LOL
|
All times are GMT -5. The time now is 01:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands