(aus) RXS3VN's 20b fc3s
#1
Full Member
Thread Starter
Join Date: Feb 2012
Location: sydney.. aust
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
(aus) RXS3VN's 20b fc3s
Hey there everyone
i have a build thread goin a ausrotary
just thought some of the fc guys on here might like it
bought this car back in 06 pretty stock apart exhaust and wheels from j-land
then it began...
setup 1
t04
front mount
full exhaust
external gate
power fc
injectors
coilovers
19inch envy wheels
and a pair of r32 gtr seats fitted
then the motor decided it had enough
so a complete rebuild began by RACE SOLUTIONS
ported/dowelled/race seals etc etc
custom intake manifold and plenum with 800cc and 1600cc secondaries injectors with custom rails
upgraded to a greddy T88-33D TURBO
and upgraded 50mm tial gate
gilmer drive set
everything either polished or powder coated
then just as i wanted to sell it but luckly
i got hooked on JDM! LOL glad i did
i got so hooked i sold my daily bagged statesman on 22s lol
for
a stock gunmetal s15
which got it fair share of mods aswell as some work wheels.
then i slowly began on the rx7
firstly strip the rx7 to a complete shell
half cage fitted
sound deadening removed
complete wiring removed
smoothed and shaved engine bay
then it came down to colour ....
so i choose the gunmetal r32 gtr colour .. close to the orignal colour but alot more nicer..
so car got painted inside and out (roll cage included)
note: in this pic the car is already half back together:
while the car was in the paint shop i bought
a pair or new recaros with rails
a pair of takata harnesses
and last but not least a set of 19inch bronze VOLK CE28NS!
i have a build thread goin a ausrotary
just thought some of the fc guys on here might like it
bought this car back in 06 pretty stock apart exhaust and wheels from j-land
then it began...
setup 1
t04
front mount
full exhaust
external gate
power fc
injectors
coilovers
19inch envy wheels
and a pair of r32 gtr seats fitted
then the motor decided it had enough
so a complete rebuild began by RACE SOLUTIONS
ported/dowelled/race seals etc etc
custom intake manifold and plenum with 800cc and 1600cc secondaries injectors with custom rails
upgraded to a greddy T88-33D TURBO
and upgraded 50mm tial gate
gilmer drive set
everything either polished or powder coated
then just as i wanted to sell it but luckly
i got hooked on JDM! LOL glad i did
i got so hooked i sold my daily bagged statesman on 22s lol
for
a stock gunmetal s15
which got it fair share of mods aswell as some work wheels.
then i slowly began on the rx7
firstly strip the rx7 to a complete shell
half cage fitted
sound deadening removed
complete wiring removed
smoothed and shaved engine bay
then it came down to colour ....
so i choose the gunmetal r32 gtr colour .. close to the orignal colour but alot more nicer..
so car got painted inside and out (roll cage included)
note: in this pic the car is already half back together:
while the car was in the paint shop i bought
a pair or new recaros with rails
a pair of takata harnesses
and last but not least a set of 19inch bronze VOLK CE28NS!
#2
Full Member
Thread Starter
Join Date: Feb 2012
Location: sydney.. aust
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
brakes arrived
and fitted
wheels arrived and fitted up with brakes
also carbon roof spoiler fittted up
well last day off before i go to work
so i bolted up the recaros (fit awesome!) started fitting up the harness
also a nardi steering with a works bell quick release boss kit
also my carbon lip arrived so fitted up
all fitted up
and just as i finished the missues dad saw the weather was good so pulled out the hot rod
and went for a cruise..
to end to the day
and fitted
wheels arrived and fitted up with brakes
also carbon roof spoiler fittted up
well last day off before i go to work
so i bolted up the recaros (fit awesome!) started fitting up the harness
also a nardi steering with a works bell quick release boss kit
also my carbon lip arrived so fitted up
all fitted up
and just as i finished the missues dad saw the weather was good so pulled out the hot rod
and went for a cruise..
to end to the day
#3
Full Member
Thread Starter
Join Date: Feb 2012
Location: sydney.. aust
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Rolled it out on the weekend
(NOTE NO MOTOR OR GEARBOX IN AS OF YET)
(exhaust not fitted 100% due no motor shenanigans lol)
In progress ATM complete car rewire was SIM-RX3
NEW TURBO arrived yesterday.
Cant wait to put the motor and this badboy on !
(NOTE NO MOTOR OR GEARBOX IN AS OF YET)
(exhaust not fitted 100% due no motor shenanigans lol)
In progress ATM complete car rewire was SIM-RX3
NEW TURBO arrived yesterday.
Cant wait to put the motor and this badboy on !
#4
Full Member
Thread Starter
Join Date: Feb 2012
Location: sydney.. aust
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
sitting in its corner... waiting for more parts
Picked up the dash from the trimmers on the way home from work
Black seude with red stitching to blend in the nardi
Another late nite in the shed
Winding coilovers up so it doesn't get stuck on the towie 2morro
And other bits and pieces like wiring and etc
Stilling waiting on suspension etc to come
And custom carbon interior pieces from the states....
It's new home for a for a while with the boys at race solutions ...
(sorry for the shitty pic )
Picked up the dash from the trimmers on the way home from work
Black seude with red stitching to blend in the nardi
Another late nite in the shed
Winding coilovers up so it doesn't get stuck on the towie 2morro
And other bits and pieces like wiring and etc
Stilling waiting on suspension etc to come
And custom carbon interior pieces from the states....
It's new home for a for a while with the boys at race solutions ...
(sorry for the shitty pic )
#6
Full Member
Thread Starter
Join Date: Feb 2012
Location: sydney.. aust
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
well it been a very busy couple of weeks for me at work and the boys down at race.
but we managed to atleast dummy the new motor in place late last nite
we will be moving a motor/box further back another 150mm so the 50/50 weight distribution isnt too affected.
we still waiting on the turbo flange to arrived to we could dummy the turbo and gate in place
any way heres some pics tell wat u think!
P.S SORRY FOR PHONE PICS CANT FIND WHERE I'VE PUT MY CAMERA..
shes pretty dusty atm
20B! cant wait to hear it with its partner in crime!:P
but we managed to atleast dummy the new motor in place late last nite
we will be moving a motor/box further back another 150mm so the 50/50 weight distribution isnt too affected.
we still waiting on the turbo flange to arrived to we could dummy the turbo and gate in place
any way heres some pics tell wat u think!
P.S SORRY FOR PHONE PICS CANT FIND WHERE I'VE PUT MY CAMERA..
shes pretty dusty atm
20B! cant wait to hear it with its partner in crime!:P
Trending Topics
#8
Full Member
Thread Starter
Join Date: Feb 2012
Location: sydney.. aust
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
well nothing major to update just mocking up bits and pieces like gearbox,turbo,fuel sytem set up.etc
waiting on a set of titanium stud kit for the 20b from the states...express isnt fast enough lol!
and lastly i bought a set of cheap 2nd hand doors trims (THANKS FREAKY!) and stripped them and to get remade into carbon (didnt wanna wreck my good pair lol)
waiting on a set of titanium stud kit for the 20b from the states...express isnt fast enough lol!
and lastly i bought a set of cheap 2nd hand doors trims (THANKS FREAKY!) and stripped them and to get remade into carbon (didnt wanna wreck my good pair lol)
#9
Full Member
Thread Starter
Join Date: Feb 2012
Location: sydney.. aust
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
anyways another quick update
motor and gearbox all mounted 100%
in the process finalising turbo and gate manifold setup
anyway here's 2 pics i quickly took yesterday while i dropped off some parts
More proper pics everything next week
motor and gearbox all mounted 100%
in the process finalising turbo and gate manifold setup
anyway here's 2 pics i quickly took yesterday while i dropped off some parts
More proper pics everything next week
#10
Full Member
Thread Starter
Join Date: Feb 2012
Location: sydney.. aust
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Update :Gearbox mount all done
Just gotta wait til everything else is completed then its off to be powder coated with the rest of the parts.
well thats about it for now im sorry it's mostly a copy and paste from another forum because im not the best on the computer.. due to the work i do.
any feedbacks or Q's more than happy to answer..
hope you guys like it
Just gotta wait til everything else is completed then its off to be powder coated with the rest of the parts.
well thats about it for now im sorry it's mostly a copy and paste from another forum because im not the best on the computer.. due to the work i do.
any feedbacks or Q's more than happy to answer..
hope you guys like it
#14
Full Member
Thread Starter
Join Date: Feb 2012
Location: sydney.. aust
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Brand of brakes are AP racing disc and calipers and lines
Custom mounted to suit fc's
Fronts:356mm 6piston
Rears 330mm 4piston
With hydraulic handbrake so to be fitted..
#15
This car is gorgeous. I love the paint you chose to go with the car. Really compliments it, especially with those AP BBK. Exactly how i would want my car. Good luck with the rest of the build!
#19
Full Member
Thread Starter
Join Date: Feb 2012
Location: sydney.. aust
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys still heaps to do
Picking my gearbox on the way home from work today
Os Giken Gearset put through it and shortened 112mm
And custom tailshaft to suit..
Thanks man don't worry only on there as a temp cause they came with the wheels from rays..
I'm waiting on a set on rays neo-chrome lug nuts from j-land and a few other things at the moment
Picking my gearbox on the way home from work today
Os Giken Gearset put through it and shortened 112mm
And custom tailshaft to suit..
I'm waiting on a set on rays neo-chrome lug nuts from j-land and a few other things at the moment
#20
Full Member
iTrader: (2)
Join Date: Oct 2010
Location: Kentucky
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
This car looks amazing! I love the wheels, lug nuts, engine, color, seats, breaks, and pretty much everything about it. Good luck with the rest. I hope someday my FC will turn out just as nice.
#23
Full Member
Thread Starter
Join Date: Feb 2012
Location: sydney.. aust
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys
Hoping to have some more progress shots tomorrow
Just waiting on some gold heat foil and my tial 60mm wastegate to arrive from the from you guys in the U.S ..express isn't fast enough lol!
Hoping to have some more progress shots tomorrow
Just waiting on some gold heat foil and my tial 60mm wastegate to arrive from the from you guys in the U.S ..express isn't fast enough lol!