Got new wheels for my anniversary. Best wife in the world!!! 17x10

Attachment 623994

Attachment 623995

Attachment 623996

nice wife...i mean wheels...i mean both! get some tires so we can truly see what it looks like on the car.

Soon

Attachment 623074

Attachment 623075

Test Fitting complete.
Attachment 623057

Attachment 623058

Looks like you'll need something more aggressive than flares...

More progress
Attachment 623019

All Done
Attachment 623009

Attachment 623010

It took some work

Attachment 623011

Attachment 623012

Looks great with the flares, where did you get the fender mirrors

Negative camber will help tuck in the front. Get some T3 camber plates.

Thanks!

They are from a JDM 323. We found them on Ebay.

Added a additional electric fan. Only pic I took before the reattaching the header panel.

Attachment 622537

The alternator died. So I replaced with a 160amp one.

Attachment 622039

Installed a themo switch for the fan.

Attachment 621255

And this came in today.

Attachment 621256

Got the pre-turbo water injection working.

Attachment 621099

Attachment 621100

Adjustable wastegate actuator for s5 turbos. The original actuator has gotten weak. Even maxing out the duty cycle of the boost solenoid and the boost would not go any higher. https://www.rx7club.com/power-fc-for...er-fc-1089097/

now i should be able to turn up the boost!!!

Attachment 620657

Have not had much time work on the car. I have been working a lot of hours. soon more boost!

Attachment 620077

Finally got some time to work on the car. I now have car the tuned for 12 psi. It is quite a ride now.

Attachment 619525

Attachment 619526

Now that everything works i am going to redo the wiring using these.

Attachment 619527

Attachment 619528

Finally finished my wiring job. It started first try!!!! It was a lot of work. I forgot to take more pictures after it was finished.

Got rid of some wires. Actually a lot more than this.

Attachment 618337

Engine Plug in progress.

Attachment 618338

Engine Plug Complete.

Attachment 618339

Parts to finish that battery relocation.

Attachment 618340

Getting close.

Attachment 618341

nice work on the wiring bulkhead connectors, that a good idea!

After seeing this thread i decided this would be perfect to monitor my car.

https://www.rx7club.com/power-fc-for...iewer-1052741/

Attachment 617305

Attachment 617306

Added an oil temp and fuel pressure sensor.
Attachment 615685

Still Working on the grounding for the sensors

I got tried of fighting the v-belts and change to a toothed belt. It is so much better no slipping when it is cold or wet.

Attachment 615686

Attachment 615687

Looks good, how close is the fan to your radiator, in the picture, it looks really close. Where did you get the belt kit from

I got the belt kit from Apex-Motoring on ebay. The fan is not as close as it looks.

Thank you, definitely going to check them out.:icon_tup:

you have 17x10's on the front? I have the same wheels as you do but in 15x9 +10 and on a gsl-se suspension with t3 camber plates/kit.