man sorry to hear your troubles =(
on a brighter note, those pics in the first post are awesome! and nice built, keep pushing! |
Thanks,
Yeah that 20b was build to a very high standard!!
Originally Posted by Bubble Tech
(Post 11687399)
man sorry to hear your troubles =(
on a brighter note, those pics in the first post are awesome! and nice built, keep pushing! |
im loving this build. I have similar plans..
|
Anyone think I've over done it with the heat management?
Was thinking of wrapping the wastegate pipes too haha! |
2 Attachment(s)
Attachment 649833
Full function rail installed! Hooray! Attachment 649834 Also noteworthy if you buy and Xtreme rotaries under drive pulley kit and use the full function trigger wheel. You'll need to use the second idler pulley hole and the belt supplied will be too small. So ask for a bigger belt !! |
Anyone use the mishimoto oil
Catch cans? |
1 Attachment(s)
|
I have one of those too. :) How do I post pictures on here and have them big like yours?
ps. I'm contemplating the mishimoto catch can as well. |
1 Attachment(s)
|
1 Attachment(s)
|
Man the build looks good. Love to see the nz rotor scene is good. i also saw this on trade me and if i didnt have mine i would of snapped it up. currently doing some more mods on my fd. hoping to get around the same power your aiming for.
|
3 Attachment(s)
Proud moments!
Attachment 649263 Twin wastegates are gunna sing like a banshee! Attachment 649264 Last look at the Os giken push pull conversion .. Very cool. Will make removing the gearbox a breeze. Too many times I've lost my cool at the factory clutch set up! Attachment 649265 |
Can't wait for this to be done!
|
This is coming together nicely!
|
3 Attachment(s)
Update !!
I've picked up quite a few bits lately ! Attachment 648008 Decided on a black gauge to fit in with the dash and it looks great. Same red needle etc! Fits perfectly. Attachment 648009 This is what $438nzd looks like in fuel fittings haha. All black everything! Attachment 648010 So low! Also picked up doen transmission parts Mazdaspeed PPF Banzai racing diff brace Banzai racing transmission brace ... ... Now with these braces , is the MS PPF needed? Oh well :P |
Have you tried reclocking the chra ?
|
Originally Posted by Turblown
(Post 11712629)
Have you tried reclocking the chra ?
|
4 Attachment(s)
Real productive weekend!
Put the PPF , driveshaft , diff & trans braces in! All the Banzai diff & trans brace fit like a glove without any issues! Couldn't believe it actually. Attachment 647463 Attachment 647464 Attachment 647465 Got some Time under the car to take another photo of the under car surgery tank and pump. Attachment 647466 Now I've only got the oil loop line from the rear turbo oil return to the filler neck to finish! |
Is that the IRP oil filler neck? Hows it fit? Nice looking build man!
|
Originally Posted by austinramsay
(Post 11717635)
Is that the IRP oil filler neck? Hows it fit? Nice looking build man!
It's great. All thought it needs to be painted almost immediately as gets surface rust on it. Shipped it cost me $360NZ so that's quite a lot. But no regrets for sure. |
1 Attachment(s)
Attachment 647423
Sitting in my drift car makes me want to half cage the streeter and transfer over the seats on non race days :/ hmmm. |
8 Attachment(s)
Update.
Managed to get the car featured in the under construction section of Nz performance car. Pretty chuffed! Thanks Marcus. Attachment 645023 Attachment 645024 Attachment 645025 Also after spending a week in Bali Attachment 645026 I decided to sell the Pettit intercooler. Visually I don't like it enough. So I'll be looking for a HKS vmount Attachment 645027 Really love the clean look. Also Will be ditching the Xtreme Rotaries pulley kit, in favor of electric water pump and braided lines to the vmount radiator. With the vmount intercooler pipes sorrounding the eñgine and no water pump in the way with a side mounted alternator I hope to really show the engine block itself. So I can point at it and tell ppl that the small thing in the centre is the engine. Unfortunately this is gauge holder is a fake and /or copy. It has no mounting points and the side cuts out arnt big enough for the indicators etc to go up . Attachment 645028 Picked up a 2002 spec cluster from Rx7 boutique. Can't wait for it to arrive ! Attachment 645029 Also added this to my toys. Attachment 645030 11 years old ... One owner from new. So stoked Check out my band Antagonist AD if you hardcore and metal. https://m.facebook.com/antagonistad?_rdr |
3 Attachment(s)
|
5 Attachment(s)
hKs vmount installed.
Attachment 643084 Attachment 643085 Attachment 643086 Attachment 643087 Attachment 643088 The kit is amazing. The fitement is like sugery and the thought and time that must have gone into is nothing short of amazing. Although u I feel like I haven't used half of the kit as includes PS and AC relocation items. Very happy! |
2 Attachment(s)
Fuel system all 100%
Made some mounts for the feed and a ghetto mount for the Fpr. The oil loop line is too long.. Need to shorten that. Attachment 642918 Attachment 642919 |
All times are GMT -5. The time now is 11:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands