SpeedNess's 1993 FD Track Build Log
#55
Full Member
Thread Starter
SS plumbing for all fuel lines and turbo oil feed. Added a https://www.instagram.com/turbosmarthq/ OPR regulator to keep the turbo happy. Every connection gets a Seco 7 seal from https://www.instagram.com/pegasusautoracing/ to ensure a leak free connection without over tightening the fittings.
2nd pic shows all the tooling required as well as all the mistakes. Definitely time consuming but the I am happy with the final result. One step closer...
2nd pic shows all the tooling required as well as all the mistakes. Definitely time consuming but the I am happy with the final result. One step closer...
#56
Full Member
Thread Starter
More plumbing... Used https://www.instagram.com/earlsperformance/ from https://www.instagram.com/holleyperformance/ 3AN PVC coated line to feed the https://www.instagram.com/motionraceworks/ 4 sensor block. Just missing the EMAP line
#57
Full Member
Thread Starter
Using hardline to feed the @vibrant_performance vacuum block. Was able to tuck the FPR line neatly under the UIM. Also the @turbosmarthq recirc valve line was neatly routed following the contour of the turbo compressor side.
The following 3 users liked this post by Michael Garcia:
The following users liked this post:
Michael Garcia (06-12-23)
Thread
Thread Starter
Forum
Replies
Last Post