i also decided to yank out the engine to do some oil pan mod
https://farm2.staticflickr.com/1667/...f81f5dab_o.jpg4 by nakahachi, on Flickr https://farm2.staticflickr.com/1688/...26ed3006_o.jpg6 by nakahachi, on Flickr https://farm2.staticflickr.com/1628/...4ac6e50b_o.jpg7 by nakahachi, on Flickr |
That engine and trans look beat. Can't wait to see where that goes. Keep bangin'!
|
oil leaks everywhere
will be fabricating an oil pan soon and mounting it car is done with its shoes on :nod:
Originally Posted by quichedem
(Post 12046261)
That engine and trans look beat. Can't wait to see where that goes. Keep bangin'!
|
so today I bought some extended studs locally
store is from ebay but talked to them I could just pick it up and they said yes yes cool https://farm2.staticflickr.com/1617/...bce33bdc_z.jpg38 by nakahachi, on Flickr started to take out the rotors https://farm2.staticflickr.com/1546/...c89b1bb4_z.jpg31 by nakahachi, on Flickr https://farm2.staticflickr.com/1512/...02ffc19b_z.jpg32 by nakahachi, on Flickr don't need to take this get pressed you can used a vise grip open nut a long washer and a little bit of muscle https://farm2.staticflickr.com/1589/...be1cdd93_z.jpg46 by nakahachi, on Flickr my technique you have to install the brakes so the vise grip would have some leverage when tightening the nut until it goes halfway https://farm2.staticflickr.com/1609/...fd17ce03_z.jpg45 by nakahachi, on Flickr after you do all of them install the rotors https://farm2.staticflickr.com/1662/...1156a715_z.jpg44 by nakahachi, on Flickr then jam a screwdriver when tightening you will be able to tell if its tight enough cause you can turn it anymore https://farm2.staticflickr.com/1498/...bf0e808a_z.jpg43 by nakahachi, on Flickr and there you go this is 50mm by the way https://farm2.staticflickr.com/1693/...43b23354_z.jpg42 by nakahachi, on Flickr installing the tires back https://farm2.staticflickr.com/1529/...d1d74a27_z.jpg41 by nakahachi, on Flickr its dark and a little bit high cause there is no engine https://farm2.staticflickr.com/1698/...13a9e96a_z.jpg39 by nakahachi, on Flickr |
so this morning I forgot to fix the passenger side skirt and fender door is hitting on it
I have to trim down a little bit https://farm2.staticflickr.com/1443/...b6ec8e85_z.jpg113 by nakahachi, on Flickr bolting it up https://farm2.staticflickr.com/1716/...3f68aae3_z.jpg114 by nakahachi, on Flickr checking it all good https://farm2.staticflickr.com/1620/...2a78e2da_z.jpg115 by nakahachi, on Flickr closes opens fine now https://farm2.staticflickr.com/1478/...dbd443bd_z.jpg116 by nakahachi, on Flickr |
so i borrowed my wifes dslr camera and just playing at 4 corners
https://farm1.staticflickr.com/767/2...167fcf57b1.jpgr1 by nakahachi, on Flickr https://farm1.staticflickr.com/589/2...6895a42f3d.jpgr25 by nakahachi, on Flickr https://farm6.staticflickr.com/5759/...a935ec5abb.jpgr28 by nakahachi, on Flickr and reborn https://farm2.staticflickr.com/1687/...dafabf7c_k.jpgIMG_2733 by nakahachi, on Flickr https://farm2.staticflickr.com/1553/...52313794_k.jpgIMG_2734 by nakahachi, on Flickr https://farm2.staticflickr.com/1486/...c08c4f1f_k.jpgIMG_2735 by nakahachi, on Flickr https://farm2.staticflickr.com/1608/...3ef3ae25_k.jpgIMG_2736 by nakahachi, on Flickr |
so I moved the car to the other side just to get a clearer mind
too much sh!@#$ next to it https://farm2.staticflickr.com/1686/...a47e0448_z.jpg1 by nakahachi, on Flickr have to start on the engine im cool with the body for now fd trans on the right still debating if im gonna use this cause theres a lot of mod involve specially the trigger sensor wheel is on the flywheel this is the killer here aside from the fd is a pull type I couldn't find a bellhousing for the 2200 also so theres a lot of factors to consider I don't want get a standalone maybe later want to get it running on stock ecu and just throw in a piggyback for tuning cause I m gonna go boosted on this compared to the existing transmission all I got to do is extend the shifter custom driveshaft and trans mount https://farm2.staticflickr.com/1527/...02c551d1_z.jpg2 by nakahachi, on Flickr checked the spark plugs still good https://farm2.staticflickr.com/1719/...798b4d8f_z.jpg6 by nakahachi, on Flickr did a compression test but my battery is dead so I just did a leakdown all cylinders are good https://farm2.staticflickr.com/1541/...d1d7a65f_z.jpg7 by nakahachi, on Flickr started taking it apart https://farm2.staticflickr.com/1523/...3322dc86_z.jpg4 by nakahachi, on Flickr https://farm2.staticflickr.com/1621/...b33c4e6d_z.jpg3 by nakahachi, on Flickr this is where the trigger sensor on the bellhousing connected to the flywheel this is weird how they designed it https://farm2.staticflickr.com/1465/...b1509ecd_z.jpg5 by nakahachi, on Flickr https://farm2.staticflickr.com/1506/...bd167be2_z.jpg9 by nakahachi, on Flickr clutch is shot of course https://farm2.staticflickr.com/1702/...e34215e4_z.jpg8 by nakahachi, on Flickr https://farm2.staticflickr.com/1636/...f5e7e010_z.jpg10 by nakahachi, on Flickr took the oilpan out https://farm2.staticflickr.com/1643/...09d80262_z.jpg11 by nakahachi, on Flickr so I can measure how much I need to cut it around 2 1/2 front and 2 3/4 rear oil pick is slanting gowing down https://farm2.staticflickr.com/1677/...8f4c0575_z.jpg12 by nakahachi, on Flickr |
so I couldn't wait till tomorrow so i decided to cut the oil pan tonight
https://farm2.staticflickr.com/1668/...2a17a15c_z.jpg14 by nakahachi, on Flickr https://farm2.staticflickr.com/1519/...90a2f02b_z.jpg16 by nakahachi, on Flickr https://farm2.staticflickr.com/1665/...c7ec705e_z.jpg18 by nakahachi, on Flickr https://farm2.staticflickr.com/1621/...685694ea_z.jpg17 by nakahachi, on Flickr cutting and a lot of cutting https://farm2.staticflickr.com/1553/...e2b88a6e_z.jpg19 by nakahachi, on Flickr grinding the pan for welding cause cant weld it with paint and oil on it https://farm2.staticflickr.com/1452/...7e39ca66_z.jpg23 by nakahachi, on Flickr i gave it an extra so will just trim it when welded https://farm2.staticflickr.com/1587/...b8c6fb1f_z.jpg22 by nakahachi, on Flickr i cant make an engine mount not unless i get this oil pan done |
Impressive 👍🏽
|
Thank you sir :nod:
Originally Posted by Boxer_FD
(Post 12047964)
Impressive 👍🏽
|
still stuck from working on the supra bushings darn...
well just cleaning up the hatch area got some parts from a guy parting out in downtown https://farm2.staticflickr.com/1705/...a3621419_o.jpg1 by nakahachi, on Flickr dust out https://farm2.staticflickr.com/1540/...523cac2a_o.jpg4 by nakahachi, on Flickr https://farm2.staticflickr.com/1473/...844e784f_o.jpg2 by nakahachi, on Flickr https://farm2.staticflickr.com/1524/...91621354_o.jpg3 by nakahachi, on Flickr https://farm2.staticflickr.com/1661/...c249945e_o.jpg5 by nakahachi, on Flickr installed the tail lights too https://farm2.staticflickr.com/1459/...372919c5_o.jpg7 by nakahachi, on Flickr |
wow this is incredible
|
so last night i grab some more parts
people here in LA are like vultures car is almost stripped if i only had the money i could have completed my interior but unfortunately its a first come first serve basis but will just have to wait again i got the engine to occupy my time while waiting some hatch seal trunk cover bose and door trim and knee plastic https://farm2.staticflickr.com/1503/...916c1a75_o.jpg24 by nakahachi, on Flickr https://farm2.staticflickr.com/1478/...e3c9f085_o.jpg12 by nakahachi, on Flickr and a gas complete gas tank ( really needed but i just grab it ) https://farm2.staticflickr.com/1657/...b3e8d2e5_o.jpg13 by nakahachi, on Flickr so i installed the bose system https://farm2.staticflickr.com/1484/...4452836b_o.jpg14 by nakahachi, on Flickr https://farm2.staticflickr.com/1491/...a550f97a_o.jpg15 by nakahachi, on Flickr installed the hatch seal https://farm2.staticflickr.com/1649/...93b29c77_o.jpg16 by nakahachi, on Flickr knee cover https://farm2.staticflickr.com/1674/...3cd9289c_o.jpg18 by nakahachi, on Flickr https://farm2.staticflickr.com/1681/...e61a7e89_o.jpg19 by nakahachi, on Flickr and the passenger door trim https://farm2.staticflickr.com/1719/...bd82c20f_o.jpg8 by nakahachi, on Flickr https://farm2.staticflickr.com/1713/...6505712f_o.jpg9 by nakahachi, on Flickr https://farm2.staticflickr.com/1531/...0e4f3f26_o.jpg10 by nakahachi, on Flickr small things really does make a difference https://farm2.staticflickr.com/1599/...1ff7bfb6_o.jpg11 by nakahachi, on Flickr |
and here it is a little bit complete
https://farm2.staticflickr.com/1442/...e6bb2ec5_o.jpg20 by nakahachi, on Flickr will install the gas tank sat and hand brake cables https://farm2.staticflickr.com/1641/...8e1e4cc5_o.jpg21 by nakahachi, on Flickr https://farm2.staticflickr.com/1657/...b3e8d2e5_o.jpg13 by nakahachi, on Flickr i got this carpet from dean two weeks ago havent installed it yet cause i have to take everything out again thanks brother!!! he bought the passenger side front clip https://farm2.staticflickr.com/1474/...29d3bd45_o.jpg17 by nakahachi, on Flickr |
so i finished the bushing last night on the supra but still have to do the timing belt
https://farm2.staticflickr.com/1706/...2d4623bd_o.jpg121 by nakahachi, on Flickr i was itching to install the gas tank so i work on it last night drop the tank https://farm2.staticflickr.com/1582/...4774053f_o.jpg123 by nakahachi, on Flickr https://farm2.staticflickr.com/1529/...c17599cb_o.jpg122 by nakahachi, on Flickr installed the new kinda hard cause this still has gas on it was going out of balance from the floor jack https://farm2.staticflickr.com/1558/...ff4287b5_o.jpg125 by nakahachi, on Flickr also installed the brake lines at the same time https://farm2.staticflickr.com/1621/...b6cfa2d2_o.jpg124 by nakahachi, on Flickr got to wake up the spiders https://farm2.staticflickr.com/1710/...4e417cf2_o.jpg72 by nakahachi, on Flickr |
Please borrow your wife's SLR more often :)
|
she wouldn't let me cause my hands are always dirty :lol:
Originally Posted by 7_rocket
(Post 12049457)
Please borrow your wife's SLR more often :)
|
so this morning cleaned up the carpet
https://farm2.staticflickr.com/1449/...8de13e88_z.jpg1 by nakahachi, on Flickr so this is what im dealing right now bondo dust https://farm2.staticflickr.com/1561/...94619558_z.jpg2 by nakahachi, on Flickr started removing the seat https://farm2.staticflickr.com/1512/...22c28407_z.jpg3 by nakahachi, on Flickr https://farm2.staticflickr.com/1671/...bf83ea75_z.jpg4 by nakahachi, on Flickr https://farm2.staticflickr.com/1456/...ab866086_z.jpg5 by nakahachi, on Flickr https://farm2.staticflickr.com/1698/...babc4fab_z.jpg6 by nakahachi, on Flickr removing the armrest https://farm2.staticflickr.com/1693/...2e01c2bf_z.jpg7 by nakahachi, on Flickr removing the dashboard https://farm2.staticflickr.com/1599/...300c241d_z.jpg8 by nakahachi, on Flickr so here is the half ass carpet I have from the front clip https://farm2.staticflickr.com/1645/...00e43dfe_z.jpg9 by nakahachi, on Flickr |
the jdm carpet is much more finer than the us
https://farm2.staticflickr.com/1457/...abeec4a3_z.jpg10 by nakahachi, on Flickr https://farm2.staticflickr.com/1482/...10902edf_z.jpg11 by nakahachi, on Flickr clean up https://farm2.staticflickr.com/1568/...14130162_z.jpg12 by nakahachi, on Flickr installing the new carpet https://farm2.staticflickr.com/1570/...3aa813c7_z.jpg15 by nakahachi, on Flickr https://farm2.staticflickr.com/1490/...174605b6_z.jpg17 by nakahachi, on Flickr https://farm2.staticflickr.com/1669/...8e74f590_z.jpg16 by nakahachi, on Flickr I realize since the dash is out might as well grab the dash harness at the same time https://farm2.staticflickr.com/1466/...d100235a_z.jpg14 by nakahachi, on Flickr https://farm2.staticflickr.com/1623/...1c57d8a8_z.jpg13 by nakahachi, on Flickr so I hang it for now I forgot how this was installed lol https://farm2.staticflickr.com/1501/...71145622_z.jpg18 by nakahachi, on Flickr |
my son Gabriel went to say good morning to me love him so much and cant wait to take this for a spin with him
he's my inspiration... https://farm2.staticflickr.com/1466/...c084a790_z.jpg19 by nakahachi, on Flickr this wasn't in the plan today but I installed the jdm harness I have so at least I have something to tap with going inside with the right measurement for now one on the left the harness that came with the car it was cut at the ecu area so I still have a spare I need to use the headlight and fuse box so I don't have to make one anymore and just eliminate the once I don't need https://farm2.staticflickr.com/1634/...2ae6b3e9_z.jpg25 by nakahachi, on Flickr https://farm2.staticflickr.com/1573/...af29a2cc_z.jpg26 by nakahachi, on Flickr passenger side first going to the firewall https://farm2.staticflickr.com/1673/...08db7ee3_z.jpg27 by nakahachi, on Flickr then driver side https://farm2.staticflickr.com/1467/...1424ea45_z.jpg28 by nakahachi, on Flickr finished https://farm2.staticflickr.com/1567/...1db3acc8_z.jpg29 by nakahachi, on Flickr https://farm2.staticflickr.com/1608/...640ca24d_z.jpg30 by nakahachi, on Flickr with all this work im doing to the car all is just to mock it up there is nothing solid yet i always think that if i didn't do it, its not gonna get done Im not lazy and theres is on one to help me i have to keep going one step at a time but im happy with the outcome for now |
last year august just a recap of what i did
https://farm1.staticflickr.com/714/2...bae697f88a.jpgr8 by nakahachi, on Flickr https://farm6.staticflickr.com/5732/...2138332b73.jpgr3 by nakahachi, on Flickr https://farm1.staticflickr.com/725/2...f6b4bef339.jpgr6 by nakahachi, on Flickr https://farm6.staticflickr.com/5752/...f16183fa77.jpgr2 by nakahachi, on Flickr https://farm1.staticflickr.com/593/2...611cff74c6.jpgr9 by nakahachi, on Flickr https://farm6.staticflickr.com/5778/...1ae8d63d0d.jpgr21 by nakahachi, on Flickr https://farm1.staticflickr.com/596/2...baa7239a21.jpgr22 by nakahachi, on Flickr https://farm1.staticflickr.com/642/2...96b9f97122.jpgr46 by nakahachi, on Flickr https://farm1.staticflickr.com/767/2...167fcf57b1.jpgr1 by nakahachi, on Flickr |
and now
https://farm2.staticflickr.com/1545/...4eebf49e_k.jpgIMG_2738 by nakahachi, on Flickr https://farm2.staticflickr.com/1678/...9834d550_k.jpgIMG_2739 by nakahachi, on Flickr https://farm2.staticflickr.com/1640/...546b4c64_k.jpgIMG_2744 by nakahachi, on Flickr https://farm2.staticflickr.com/1697/...256eac73_k.jpgIMG_2745 by nakahachi, on Flickr https://farm2.staticflickr.com/1509/...1f31f75a_k.jpgIMG_2740 by nakahachi, on Flickr https://farm2.staticflickr.com/1716/...04c1a0c1_k.jpgIMG_2743 by nakahachi, on Flickr https://farm2.staticflickr.com/1514/...767cd26a_k.jpgIMG_2742 by nakahachi, on Flickr https://farm2.staticflickr.com/1495/...7552dfd4_k.jpgIMG_2747 by nakahachi, on Flickr https://farm2.staticflickr.com/1643/...9663c687_k.jpgIMG_2746 by nakahachi, on Flickr Im happy!!! |
That's great stuff man! Keep up the good work!
|
thanks its not easy but im trying to do my best resurrecting it!!!
Originally Posted by FD_6423
(Post 12050021)
That's great stuff man! Keep up the good work!
|
All times are GMT -5. The time now is 08:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands