When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I had a local plating company here in Indianapolis do it. As for the fuse box/starter harness, I took the bracket out so I could paint it and installed it after I took the pictures.
Pretty proud of myself, fired up on the first try. Ran into one problem when we found an oil leak, turned out one of the oil cooler lines wasn’t fully seated. This was my first time rebuilding a rotary, so time will tell how good the rebuild really is.
Last edited by kenpo1441; Mar 24, 2019 at 09:51 AM.
So I finally got it running and driving!!! It was 100% stock prior to the rebuild. I removed the OMP and I am now pre-mixing with 1oz of idemitsu per gallon. Is it normal for smoke to come out of the exhaust after turning the car off for a few minutes?
Last edited by kenpo1441; May 6, 2019 at 10:09 AM.
Is this car on the Northside? I feel like I recently saw it driving around 146th.
Im just about able to drive mine and its also red so I thought I was dreaming for a second when I saw it haha
Is this car on the Northside? I feel like I recently saw it driving around 146th.
Im just about able to drive mine and its also red so I thought I was dreaming for a second when I saw it haha
Sorry, I don’t get on here much. I live in the south side, I know of another red one and I’m pretty sure he’s from the north side.
Dropped the subframe to fix a oil leak and replace the bushings while I have it all apart. Also threw in the twin power mount I bought from code red performance on Facebook.
