my fender wire tuck
Since i am not going to be running the stock fender liner, i felt it was best to tuck my chassis harness a bit better then it is stock..
1 reason, i don't want to run the risk of my wheels rubbing agains the harness and causing a short or tear at the harness. I eventually plan on putting some type of aluminum fender liner... 2nd i wanted to clean the the chassis and under the fenders( didn't want any spiders and dirt under there lol) Stuff needed: zipties 8mm,10mm socket phillips screw driver cleaning stuff 1st, Jack up the car and put it on jack stands, remove the wheels and fender liner.(note there are screws and bolts holding it in place, so you will need a phillips screwdriver and a 8mm socket.) 2nd, open the hood, pop your head lights up, and remove the bumper.( you will need a 10mm socket with extension, and screw driver.) there are 3 10 mm bolts on the side of the bumper,4 on top, and 1 phillips screw on the side.( you will also have to remove your undertray if you have one). http://projectfd.com/zero/wp-content...15-300x225.jpg After you remove the bumper, youll need to remove the fender.( there are 7 10mm bolts holding it in place. 3 top side, 1 by the door, 2 under the fender, and one in the front.) http://i22.photobucket.com/albums/b3...20tuck/020.jpg Under the fender you will notice how the chassis harness is just kinda hanging.( my was covered in dirt and cobwebs). http://projectfd.com/zero/wp-content...01-300x225.jpg http://projectfd.com/zero/wp-content...20-300x225.jpg |
continued.
8 Attachment(s)
basically i cleaned up it up, wiped it down. then i began looking to see where was a good spot to zip tie the harness, and also routed the harness a bit higher,so it sits directly under the top of the frame lip(right under the fenders).
Attachment 710394 Attachment 710395 http://i22.photobucket.com/albums/b3...20tuck/003.jpg Attachment 710396 Attachment 710397 Attachment 710398 Attachment 710399 http://i22.photobucket.com/albums/b3...20tuck/010.jpg Attachment 710400 Attachment 710401 |
last
4 Attachment(s)
after securing the zipties and harness in place. slap the fenders back on, then bumper.
your harness should look like this underneath the fender. Attachment 710402 Attachment 710403 Attachment 710404 Attachment 710405 enjoy fuckers. |
hahhaha good boy...
just one suggestion............ since youre not running a stock steering wheel, why not eliminate the airbag wires....... it'll make your tuck a lot easier and more room for your body harness, rather then fighting for space with the airbag wires... cuz lets be real. 1 ur not using em, 2 the airbag in the fd aint savin shitttttttttttttttttttt!@ more pics! |
5 Attachment(s)
Originally Posted by muibubbles
(Post 10085140)
hahhaha good boy...
just one suggestion............ since youre not running a stock steering wheel, why not eliminate the airbag wires....... it'll make your tuck a lot easier and more room for your body harness, rather then fighting for space with the airbag wires... cuz lets be real. 1 ur not using em, 2 the airbag in the fd aint savin shitttttttttttttttttttt!@ more pics! ya, fuck the airbag.. i rather smash my face against my nardi any day of the week rofl.. heres some pics rocking the stance coilovers.... Attachment 710406 Attachment 710407 Attachment 710408 Attachment 710409 Attachment 710410 |
daintyyy, excuse me if i missed this, what roll cage is that? interior trimming required?
|
Originally Posted by muibubbles
(Post 10085616)
daintyyy, excuse me if i missed this, what roll cage is that? interior trimming required?
hahah;) its an autopower 6 pnt cage. its made to run full interior.... but im trying to keep my weight down :D |
sexy, the side bars removable? powder coated or painted? how mcuh did that cost!
im gonna ban you from your own thread if you post without pictures. each post you make must contain a picture! |
Originally Posted by muibubbles
(Post 10085915)
sexy, the side bars removable? powder coated or painted? how mcuh did that cost!
im gonna ban you from your own thread if you post without pictures. each post you make must contain a picture! heres some oldies.. http://projectfd.com/zero/wp-content...41-494x277.jpg http://projectfd.com/zero/wp-content...02-494x277.jpg http://projectfd.com/zero/wp-content...34-494x658.jpg http://projectfd.com/zero/wp-content...35-494x658.jpg |
|
^You had better hurry your tight pant wearing ass up you have 2 months
|
Originally Posted by Force13B
(Post 10085967)
^You had better hurry your tight pant wearing ass up you have 2 months
right now, to get the fd running, i need haltech(not sure which to get yet), dp, mide pipe, and intakes.... and of course paint and body(which will be taken care of real soon).. |
man i gotta start getting on the forum more... i miss looking at all the pictures and shit
|
Can't wait to see your car done....
|
stock twins? idk if ur looking for specific ones but if u need i got 2 greddy filters with some ebay piping that i used for my 99spec twins... 35shipped if u want em
|
July, August, September 18th. :scratch:
This project better be done by then, or don't bother showing up the morning of SSXIII kid!:lol: you had 1 extra year to get it running... |
Originally Posted by KaiFD3S
(Post 10086965)
Can't wait to see your car done....
Originally Posted by muibubbles
(Post 10086974)
stock twins? idk if ur looking for specific ones but if u need i got 2 greddy filters with some ebay piping that i used for my 99spec twins... 35shipped if u want em
Originally Posted by Rotary13B1
(Post 10087024)
July, August, September 18th. :scratch:
This project better be done by then, or don't bother showing up the morning of SSXIII kid!:lol: you had 1 extra year to get it running... hahah thanks Andy.. i know i know.. i lagged it... but im almost there... this time lol.. |
4 Attachment(s)
WOOT WOOT. picked up some 1580cc Bosch Inj's!!!!! tossing those fucking cheap POS pythons out...
also picked up Farkel's old Exhaust setup, Greddy SMIC, and some other stuff.. A pic when it was on his fd. http://projectfd.com/wp-content/uplo.../12/flush5.jpg http://projectfd.com/wp-content/uplo.../12/flush1.jpg Heres when i was comparing it next to my Apex'I GT spec exhaust. http://i22.photobucket.com/albums/b3...ies/001ggj.jpg Finally got a seat again(R1 seat) Attachment 710411 Attachment 710412 Attachment 710413 Attachment 710414 |
i'm a big fan of the bandanna + rubber band steering wheel hub. thats a WIN in my book :D:icon_tup:
|
^ lol just bandanna.. and tied at the end
|
http://sphotos.ak.fbcdn.net/hphotos-..._4451705_n.jpg
before dual 25 row oil coolers and my ghetto bracket lol.. http://sphotos.ak.fbcdn.net/hphotos-..._7831007_n.jpg http://hphotos-snc3.fbcdn.net/hs014...._1416029_n.jpg http://sphotos.ak.fbcdn.net/hphotos-..._4864126_n.jpg http://sphotos.ak.fbcdn.net/hphotos-..._5372385_n.jpg |
that bitch needs to be runnin asap
|
shexy, what oil cooler kit is that?
|
got them from my buddy at cx racing... same one they run with their 20b drift fd
|
what kind of lines/where are you getting ur lines from? me need dual oil coolers...me car like to run hottttttt
|
All times are GMT -5. The time now is 09:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands