Is that a Vertex front bumper?
|
Originally Posted by goodfellafd3s
(Post 11256744)
oh.my.god.
Please remove those headlights, and taillights, and set them on fire. Completely ruins the look of the car.... That's not an fd any more. It's an african bullfrog :( |
7 Attachment(s)
another update. took the LIM (lower inlet manifold off to give everything a bit of a clean and ultrasocaly clean the injectors and inspect everything. i manage to snap an in jector diffuser while i was at it so ill order new ones from masada (not cheap). I TASTED THE FUEL AND IT HAD NO TANG WITH IT. OLD HORRIBLE FUEL. I CANT BELIVE IT EVEN RAN!
heres om pics FUEL PUMP LOOKS GOOD Attachment 681083 FUEL TANK LOOKS GOOD Attachment 681084 OLD DOWNPIPE, (HOW UGLY IT THAT)! Attachment 681085 Attachment 681086 CRACKED TWIN TURBOS Attachment 681087 WHAT DOES THIS PORT DO? Attachment 681088 Attachment 681089 ANYWAY IVE TAKEN THE BITS TO WORK AND EVERYTHING HAS BEEN ALL CLEANED AND LOOKING GOOD. NEW O-RINGS FORFUEL SYSTEM ETC. I LIKE TO GIVE EVERYTHING THE ONCE OVER WHEN REBUILDING THINGS. CHEERS |
7 Attachment(s)
bit of an update :)
new wheels, flippy up headlights and vaccume system gone ready for single turbo Attachment 679941 gave everything a bit of a lookover and ported the LIM Attachment 679942 Attachment 679943 fitted my new power fc Attachment 679944 Attachment 679945 i like channel 8 :) Attachment 679946 no double throttle anymore :) Attachment 679947 |
3 Attachment(s)
Attachment 679938
Attachment 679939 commander for ecu fits nice and snug in here :) Attachment 679940 more to come. sorry for the picture quality Gavin Bey |
9 Attachment(s)
bit of an update :)
while i was stuffing rags to stop things going into the block i heard a snap. it was a injector difuser. £26+VAT each. so exspensive mistake but i will know for next time. Attachment 679852 new ones Attachment 679853 new inlet manifold gasket Attachment 679854 Attachment 679855 primary 550 injectors Attachment 679856 front bumper with silly lights Attachment 679857 Attachment 679858 Attachment 679859 Attachment 679860 AND GUESS WHAT! TURBO KIT HAS ARIVED TODAY WOOOHOOOOO |
That fuel tank is cleeeeeean. Who did you use for the ceramic coating? looks great.
|
Originally Posted by Ceylon
(Post 11398619)
That fuel tank is cleeeeeean. Who did you use for the ceramic coating? looks great.
when i bought the turbokit from america the builder got the parts coated for me so im not sure of the name. ill get some pictures tonight as its been delivered. need to find a boost controler. anyone have one? |
Hey you know you may want to re-consider using the injector diffusors. There have been more than a few members on here that have had them fail and sucked into the motor. They have the potential to ruin your motor. Newer style injectors have much finer spray patterns and the diffusors are really useless. Might as well toss them in the trash and prevent a possible major fail point!
Nice build btw!! I too have the vertex front bumper! i love it! |
Originally Posted by mannykiller
(Post 11398787)
Hey you know you may want to re-consider using the injector diffusors. There have been more than a few members on here that have had them fail and sucked into the motor. They have the potential to ruin your motor. Newer style injectors have much finer spray patterns and the diffusors are really useless. Might as well toss them in the trash and prevent a possible major fail point!
Nice build btw!! I too have the vertex front bumper! i love it! i was looking at the bosch 1680cc injectors for my secondaies. any help is appreciated as every day is a learnign day for me with these cars. thanks for the comment. |
8 Attachment(s)
WELL GUYS AND GIRLS ITS HERE. MY SINGLE TURBO KIT.
looks pretty. wasnt so pretty trying to get the bastard to fit! eventualy it went in. currently welding another boss onto my downpipe for the AEM wideband and need to sort some other bits and bobs out but apart from that its all good. made up a drawing of re-wiring my fuel pump which i will run with 2x 30A relays as i will be using the standard pump as a lift bump then a bosch 044 inline pump to boost the pressure. obviously ill need new fpr, injectors and fuel rails. ill be going for the 850cc from my secondarys into my primarys and then using bosch 1680cc injectors for my secondaries. once its running i will be using the base map on my power fc to get it through an mot. then spray job then mapping. as im in shetland it will be a 600 mile+ drive to a rotary tunner :( owell. ANYWAY GUYS HERE IS SOME PICTURES Attachment 679284 Attachment 679285 Attachment 679286 Attachment 679287 Attachment 679288 Attachment 679289 Attachment 679290 its my bazzzooookaa Attachment 679291 |
6 Attachment(s)
now this is a cheap dumpvalve. i will be going for a nice tial one when i can afford it
Attachment 679278 Attachment 679279 Attachment 679280 fitted Attachment 679281 Attachment 679282 Attachment 679283 ill be going out tonight to finnish some bits and bobs off. shouldnt be long untill its on the road :) thanks for any comments p.s the rear lights are coming off and i have origonal ones in the post. cheers |
if you can swing it go with newer I.d. Injectors. I'm using the ID 850's primary and 2000cc secondaries. The injectors you have will work though. Just ditch the Diffusors =-)
|
Originally Posted by mannykiller
(Post 11403838)
if you can swing it go with newer I.d. Injectors. I'm using the ID 850's primary and 2000cc secondaries. The injectors you have will work though. Just ditch the Diffusors =-)
so these id injectors are what to go for? are they hi impedance? i think 2000cc will be too much for my setup. 850's in the primaries will be fine though# |
You won't need resisters for the injectors. The 2000's are very tuneable.. You don't have to run 90% injector duty.. they'll be just fine for your application.
|
Originally Posted by mannykiller
(Post 11410108)
You won't need resisters for the injectors. The 2000's are very tuneable.. You don't have to run 90% injector duty.. they'll be just fine for your application.
|
so its been a while and lots have been done:
single turbo complete its motd taxed insured tail 50mm bov blitz boost controler ordered rota grid drifts et30 front et20 rear 9.5 18" aem wideband power fc datalogit bc racing coilovers blitz nurspec exhaust twin resanator mid pipe screamer pipe from wastegate its now painted with rattle cans primer grey bocsh 044 inline pump swirl pot sard fpr dm-motorsport fuel rail 2200cc bosch high impedance injectors and lots more. ill get pics up when i can. thanks guys |
Awesome build!! Glad you came around with the front lights! The rest seems well done. Cant believe it sat in a field for 5 years :/ Good luck!
|
11 Attachment(s)
Originally Posted by raceratheart15
(Post 11468873)
Awesome build!! Glad you came around with the front lights! The rest seems well done. Cant believe it sat in a field for 5 years :/ Good luck!
well well. im well overdue an update, been for an operation so i had som time off work to play with the car. so much has been done recently. its all taxed mot'd and insured. completley road legal. so i think i can say ive saved this fd3. had some major issues with the car not starting (kept flooding) it was down to bad injectors and dodgey stock fpr. seems to be good for now. and its quick! very quick. ive never driven or even been in an rotary car so the first drive was new to me. here is some pics. all comments welcome good or bad :) Attachment 672074 huge jetex air filter........ it didnt fit Attachment 672075 datalogit box for the power fc Attachment 672076 stock rear lights before i modified them Attachment 672077 i cut out some circles with vinyl Attachment 672078 started to spray the lights. (satin black) Attachment 672079 all done Attachment 672080 welded two new tips on the tail pipes as the old ones were dented and rooosty. Attachment 672081 indicators/sidelights fitted onto bumper Attachment 672082 Attachment 672083 datalogit box with aem wideband connected hiden behide glove box Attachment 672084 old plugs / new plugs (9s) leading and trailing |
11 Attachment(s)
Attachment 672063
bc racing coilovers ( i love these) Attachment 672064 fitted Attachment 672065 starting to map Attachment 672066 lack of jacks Attachment 672067 fitted my bocsh 044 inline pump ( swirl pot coming.... fuck its noisie) Attachment 672068 hks gd twin plate clutch and flywheel Attachment 672069 ohh heyyy Attachment 672070 my bike Attachment 672071 my trials toy Attachment 672072 these are the split rims (stern meister 16s) 17" BUT SOMONE STOLE ONE OF THE CENTRES so i dont have a full set. they would of cleaned up nice too. Attachment 672073 i got bored of it being all diffrent clours. im saving for a profectional spray job :) |
7 Attachment(s)
Attachment 672056
this is deffo me Attachment 672057 bocsh next to an evo fuel pump :) Attachment 672058 out for a run Attachment 672059 Attachment 672060 Attachment 672061 the dash Attachment 672062 and the wheels ive just bought :) that took me adges to type! ha. over and out. |
3 Attachment(s)
another little update,
tail bov fitted. sounds awsome. misffire when coming on boost ( i blame the fuel) ill try retard the map a bit. got bored and painted the bonet :) saving up for a full respray Attachment 671492 Attachment 671493 Attachment 671494 hopfully wheels come soon. what do people think about the black bonnet? does it look better grey? :) |
project looks awesome, who makes that front bumper? fitment looks off
|
Originally Posted by mofo_aka
(Post 11474609)
project looks awesome, who makes that front bumper? fitment looks off
im not sure. i bought it from ebay. aero possibly. someone mentioned vortex but yes your right it doesnt fit perfect. around the bonnet and hedlights and wings. i can do some fibreglassing to get it more snug but im not too fussed justnow |
9 Attachment(s)
another update. been quite busy.
engine bay finnished Attachment 670264 here is a con rod from my pals evo (i found it siting ontop of the gearbox! Attachment 670265 bucket seats Attachment 670266 going to make some rails :) Attachment 670267 Attachment 670268 Attachment 670269 Attachment 670270 Attachment 670271 measurments Attachment 670272 |
All times are GMT -5. The time now is 03:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands