|
2 Attachment(s)
Oil catch can
|
The car was tuned by LOOKatme and she runs like a boss. If you have a PfC and live around Colorado this is the guy you need to talk to. Thanks again Lookatme.
|
what wheels are those, they seem like te37 knockoffs, but look and fitment are good.
|
Originally Posted by musclecarconvert
(Post 11760206)
what wheels are those, they seem like te37 knockoffs, but look and fitment are good.
|
Looking good! You need to get that intake out of there though! That thing is a dinosaur..
|
1 Attachment(s)
Intake
|
Originally Posted by musclecarconvert
(Post 11760206)
what wheels are those, they seem like te37 knockoffs, but look and fitment are good.
|
1 Attachment(s)
Did you say oil temps
|
Nice build bro' and so quick. My car has been sitting forever. I wish you were closer so I could bribe you for help with some beers. Haha, keep it up brotha.
|
Any thoughts on a BOV
|
nice build! Engine bay looks super clean
|
how is the car running ? i haven't found a FD here in Korea the engine you build its in my motorpool lol
|
The car has come a long way but there is over spray on EVERYTHING! One of the number one signs of a cheap paint job is poor prep. The car looks great but the over spray would drive me NUTS!
|
Originally Posted by gtuturbo2
(Post 11828760)
how is the car running ? i haven't found a FD here in Korea the engine you build its in my motorpool lol
|
2 Attachment(s)
mi aparment in korea
|
nice fast work. no fooling around. whatcha going to do all winter now? :)
|
Originally Posted by gracer7-rx7
(Post 11849647)
nice fast work. no fooling around. whatcha going to do all winter now? :)
|
I'm curious if it was really necessary to cut the wheel well liner for airflow on the oil coolers.
Or did you do it for fitment of the fans? Do they come on when the rad fans do or did you make a separate circuit with a target temperature? |
Originally Posted by gtuturbo2
(Post 11828760)
how is the car running ? i haven't found a FD here in Korea the engine you build its in my motorpool lol
Originally Posted by gtuturbo2
(Post 11849303)
mi aparment in korea
Nice set up I need one for my living room too. Send me a PM with you APO address I need to send yo u a gasket for you forward turbo oil drain. |
1 Attachment(s)
Originally Posted by gracer7-rx7
(Post 11849647)
nice fast work. no fooling around. whatcha going to do all winter now? :)
Lol thanks, this is a sneak peek, for my winter project..... |
Originally Posted by tt7hvn
(Post 11849714)
I'm curious if it was really necessary to cut the wheel well liner for airflow on the oil coolers.
Or did you do it for fitment of the fans? Do they come on when the rad fans do or did you make a separate circuit with a target temperature? I didn't need to cut the liner but I didn't want to create a pressure zone for the fan to fight against. I also wired the fan with its own 12V power supply and fuse. I put a switch by the shifter, the reason I didn't tap into the rad fans are I wanted the ability to turn the fans on a lot sooner. |
Working on a custom V Mount duct...
|
2 Attachment(s)
V mount
|
2 Attachment(s)
Just need to finish cleaning it up and find some weather stripping on it.
Lol not bad for a garage build...... |
2 Attachment(s)
V Mount with custom duct and stock battery location..
|
| All times are GMT -5. The time now is 05:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands