danielbradley2

LOTS OF PICTURES

Well it's about time I finally start up my own build thread for my rx7 after a years worth of work it. I first picked this baby up Bone stock with just exhaust work and 47,000 miles on her, around mid September in 2014 as my new "daily driver". Everything was great about the car nothing wrong. Then some time around Febuary of 2015 it would start to break up around 4K rpms. I bought a new apxei ecu when to get it tuned and what do you know the stock twins went up and only made 170whp So that's when it all started the modding, which was soon to come anyway,

I had the the shop how tuned it do a whole single turbo swap for me sense I didn't feel comfortable yet messing with the rotory yet. After everything was said and done I made 280whp @13psi Pump gas 93 with the same turbo I have to date.

Then the second build came sometime in Agaust just about 2 months before H2Oi 2015. Which was my goal to have a full rebuilt bridgeported and some other odds and ends to support it before H2Oi. Which I ended getting everyone that I needed to and made it to H2Oi safely and only got pulled over three times while in Ocean City for my exhaust As I didn't give the shop enough time to finish the tune with a street test so it would die out if I didn't hold the rpms up around 1500-2k rpms. Then when I got back I dropped it back off to them to finish it and she runs like a dream expect with all the little problems that come up after building a car

1994 FD3D RX7 Touring
Montego Blue
52,000 Miles

First build Done By MA Motorsports 280whp 13psi Pump Gas
Engine
-Stock engine
-Banzai Racing Gold Pulley Kit
-New Water Pump
-New Power Steering Pump

Drivetrain
-Stock Transmission

Wheels/Tires/Suspension
-Custom Powder Coated OZ Racing Pegasus
-17x8 et25 Polished 1.5" Lips
-17x10.5 et45 Polished 2.5"Lips
-Chrome Gold Bolts
-Falken Azeins RT615K
-Front 245/45R17
-Rear 275/40R17
-Fortune Auto 500 Series Coilovers
-Polished Greddy Front Strut Bar

Turbocharger/Exhaust
-Garrett GT35R with Ceramic Coated Housing
-ATP 1.06 A/R Exhaust Housing
-Turbosource T4 Twin Scroll Dual Wastegate Manifold
-Twin Tail 38mm Watsegates w/ Dump Tubes
-RX7 Store 3" V-Band Downpipe
-Full Custom 3" Exhaust w/ 3" Inlet 4" Outlet Magnaflow Muffler

Intake/Cooling
-Greddy Intake Elbow
-M Spec Style FMIC and Pipping
-Tail 50mm Q BOV

Fuel System
-KGParts Primary and Secondary Fuel Rail
-Stock 850 Secondary to Primary Injectors
-ID 2000 Primary Injectors
-Walbro 255lph In-Tank Fuel Pump
-Aeromotive Fuel Pressure Regulator

Interior
-Custom Baseball Stitched OEM Seats/OEM Shift Boot/OEM Handbrake Boot (Came With the Car)
-Grip Royal Royal Ace
-NRG Chrome Gold Short Quick Release
-Crow 3" 5 Point Harness

Engine Managment/Electronics
-Apei Power Fc w/ Commander ECU Tuned
-AEM A/F Gauge
-AEM Boost Gauge

Exterior
-Shine Auto R1 Lip Painted Gloss Black
-Shine Auto Carbon Fiber Spec RE Street Diffuser
-Shine Auto Duck Bill Spoiler Painted Gloss Black
-Rolled Fenders and Quarters


Second Build
Engine
-Angel Motorsports Full Bridgeport 13B REW
-Himni Racing Solid Motor Mounts
-NGK 9 Spark Plugs

Drivetrain
-Banzai Racing Transmission Brace
- Replica BnM Short Shifter
-Kaaz 1.5 Way LSD
-Powerflex Black Series Diff Mount Bushings


Exhaust
12" Resonator

Intake/Cooling
-Ported Lower Intake Manifold
-Rotary Works Throttle Body
-Angel Motorsports Polished Water Neck
-Mishimoto N-Flow Radiator
-Mishimoto 180 Degree Thermostat
-Pettit Racing 185 Degree Thermoswitch

Fuel System
-KGParts Primary and Secondary Fuel Rail
-ID 1000 Primary Injectors
-ID 2000 Primary Injectors
-Aeromotive Stealth 340lph In-Tank Fuel Pump
-Aeromotive Fuel Pressure Regulator
-Continental Flex Fuel Senor
-6an Steel Braided Fuel Line

Engine Managment/Electronics
-Adaptronic PnP ECU Tuned by MA Motorsports
-Sake Bomb AEM Smart Coil Ignition Setup
-AEM Waterp Temp Gauge
-AEM Oil Pressure Gauge

Exterior
-945 Garage Custom Headlights w/ LED Bars Painted to Color Match
-APR GT Mirrors
-Tinted Turn Signals and Corner Lights

danielbradley2

danielbradley2

danielbradley2

danielbradley2

danielbradley2

danielbradley2

When I bought





To now

zilvinas007

iTrader: (1)

What lights model did you use and there you get empty lights housing

danielbradley2

They are 945garage headlight buckets and the lights are just led light bars I picked up from a local shop. They actually work very well at night time and have yet to have any trouble from the police

shawnm565

iTrader: (3)

Very nice! You are in good hands at MA motorsports.

dannng

iTrader: (22)

can you take some pictures of the night output of these lights?

danielbradley2

Yea sure no problem I soon as I get this oil leak fixed I'll take some pictures and I'll put a video up on my channel of it too

K-Tune

iTrader: (26)

Was that a typo on your front tires? They look a lot smaller than 245

danielbradley2

Nope they are 245

danielbradley2

Short Video doing a street test pass

https://www.youtube.com/watch?v=dZdD...ature=youtu.be

K-Tune

iTrader: (26)

Why does your stack of new azenis have a tire with a 215/45r17 sticker on it? That makes more sense when you see how stretched they are on an 8" wide wheel.

danielbradley2

Whoops your right haha that's the tire size I was looking at moving up to with different wheels my bad but they actually aren't really stretched at all I have them so they fit flush and not boldging out or stretch it may look like that in the pics

JZW

iTrader: (5)

I live in MD as well. I was wondering what your opinion on MA motorsports is though.

danielbradley2

MA is amazing great guys that do great work 10/10!!!

Spalato

iTrader: (33)

Nice job on the lights! Very different from the norm. I like it

danielbradley2

Hey guys been really busy with boot camp and all and now im going to be graduting my schooling here very soona and also having my car shipped to me soon with some added on stuffI bought that my step brother and best friend are guna put on for me before it gets shipped will post pics when it arrives