I leave you guys alone for a night and you go install shit upside down... Chartard would look down upon this!
|
3 Attachment(s)
Weeeeeee it fits now.
Attachment 757834 Attachment 757835 Attachment 757836 Start putting in the new piece tomorrow. |
6 Attachment(s)
shiny
Attachment 757798 mmmmmmm Attachment 757799 Finally got around to running the lines to the fpr Attachment 757800 Attachment 757801 Attachment 757802 Attachment 757803 |
digicamo looks cool very different look nice bulid
|
4 Attachment(s)
Finished the oilcooler lines.
Attachment 757774 Attachment 757775 Added some bling bling Attachment 757776 Going to get real serious this weekend. Attachment 757777 100ft spools of mostly 18, going to be most of the full new lightened body harness. |
You might need more colors than that haha. I'm still kicking myself for reusing the same color for different functions in the harness. I've got it all labeled so it's not that bad, but different color wires really make it easy.
|
front relay box has 8 relays, got enough for that harness. cabin relay box has 12, but will come out in two harnesses
|
nice swap mate. what kinda power and tq figures you running? im starting to really consider doing a v8 swap now.:)
|
1 Attachment(s)
We pushed 456 whp through a single 3in cat leaving around 8* of timing on the table because of the restrictive exhaust. We should be around 510+ with a free-er flowing exhaust. Eventually going to put a whipple on it and be near 800.
Started a spaghetti monster. Attachment 757773 |
2 Attachment(s)
more marginal progress!
Reusing a fabbed oil breather Attachment 757762 Replaced the heavy fuel pump access with light cheap AL! Attachment 757763 |
must........have..........updates!
|
1 Attachment(s)
Building the cabin relay box/switch panel right now.... hopefully borrowing a friend's welder tonight so we can mig the firewall instead of tig. We want to have first drive in a week... aim high! Also threw away the spaghetti monster above design was good on paper but too many relays in application.
Attachment 757744 |
Like a boss! ill see if i can make the make the 7th for the release of this thing. You still on schedule?
|
We got 1/2 the new firewall in last night and i just finished all the rear indicators. So far yes. I just hope we will have time for an alignment. Lol
|
Hoping to see this thing again at IFO!
|
Mark will never go to IFO again. There may be too many stock RX8's with aftermarket wheels that will place higher than him.
|
Actually kevin, we are pushing hard to try to make it sunday... its given us a completion date to try for
|
4 Attachment(s)
Soon!
Attachment 757734 Attachment 757735 Cobbled on but nearing completion... going to grind welds flush so no cares Attachment 757736 Shout out to our best friend, Rockstar! If only we could be sponsored. Attachment 757737 |
you got more pics of your tail light setup? :)
|
Ill have alot more pics once we have time to take em,, focusing on getting her done for sunday lol
|
3 Attachment(s)
Firewall is done,
Attachment 757729 someone wanted these photos: Attachment 757730 Attachment 757731 |
2 Attachment(s)
A friend of mine who has no fear of using a heat gun in florida heat for hours on end decided to strip the oem deadening.
Attachment 757722 Fuel + electrical, then vroom vroom. Attachment 757723 |
^Should have used dry ice for removing the sound deadening, more effective and cooler.
|
Heat gun = free.
|
i'm interested in seeing how much that box of sound deadening weighs.
also, what is the thing with the filter on the pass side of the fire wall? coming along nicely. i'm really impressed at how fast you've put this car together. i'm sure the gumball run will be amazing. |
All times are GMT -5. The time now is 05:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands