|
Hang on, isn't that an LS2 block????
|
ls3
|
NOOOOOOOO!
Keep the Rotary alive!!! |
For the new direction of the build the rotary was not practical anymore. Wasn't of the common excuses of power curve, torque, or 'reliability'. It was for mpg at triple digits building for cannonball runs. Stoping for fuel makes you lose.
|
Awesome, I'd love to do a cannonball run.
|
I see....
|
3 Attachment(s)
Transported her to Gainesville for final fab, wiring, and assembly!
Attachment 757880 Decided to go with my new racing brake front bbk instead since they werent selling. Also put on my aragosta coilovers i've had in a corner. Also note SCREW thoose carbon brake ducts that were sold in a small group buy.. they were a few degrees off of flat, towards the rotor could not cut them to work either.. So we 5lb hammered them in hate. Attachment 757881 Started the al sheeting for the front wheel wells. Attachment 757882 |
Really liking the camo, nice project you have there!
|
Love this thread.
|
6 Attachment(s)
thanks for the kind words,,, updates
10an fuel filter Attachment 757866 2x 6an to 10an, dual 255s intank cj kit Attachment 757867 New 3rd brake light,, going to plastidip the silicon board to hid it and make a lil shroud Attachment 757868 Since i have a tech2 hood enroute got this new fillcap Attachment 757869 some toys :D Attachment 757870 got this last chunk in before we had to call it quits for the day, cant mount it anywhere else and have good placement of lines. My camera angle is terrible Attachment 757871 |
I love you Mark! (Semi-homo).
|
3 Attachment(s)
Plasti dipped the 3rd brakelight so its all ninja now.
Attachment 757863 Awww kevin your so sweet, I turned emo and cut her up. plasma cutter :icon_tup: Before, and after.. Attachment 757864 Attachment 757865 |
4 Attachment(s)
Room for cooler lines
Attachment 757858 Oil t-stat Attachment 757859 Attachment 757860 Attachment 757861 |
Awesome build man!
|
4 Attachment(s)
Got my tech2 hood in.... PLENTY of room for the fast 102, but thats not the goal. Eventually going to put a supercharger on it. it appears to give 3 to 4" over stock hood. Whipple 2.9l is ~10.5 in tall, fast 102 is ~7.5....
Attachment 757853 Attachment 757854 Attachment 757855 Attachment 757856 |
nice paint
|
Originally Posted by ChiefStyn
(Post 11214404)
nice paint
|
4 Attachment(s)
Mines a wrap, going to get it redone in a darker selection when car is compete.
Dropped her back on the ground with her new aragostas, all solid bushings, and thoose new j-auto lca/trailing rod combo.. jesus we need to spin thoose coils down vs the rx7 they were on. A solid ~700lbs of weight reduction gave use a few inches of raise LOL. The first alignment she recieve is going to be hell for the tech,, there are like 4 places for each type of adjustment lol. Attachment 757844 Attachment 757845 Attachment 757846 MMMMMONSTER TRUCK! lol i dont think we can even get low enough off of whats adjustable :( time to sell these and get new coils it seems. Or just new springs.. and yes we tried to settle them down, this is post settleing.. Attachment 757847 |
The digital camo is sickkkk!!!
|
How much did it cost to get that wrap done anyway?
|
It might help if you flip the upper control arms as they are installed upside down in your pics. That will get you much lower.
|
It might help if you flip the upper control arms as they are installed upside down in your pics. That will get you much lower. |
Just noticed too dam... mabey we should stop putting stuff together at 3am.. when drinking starts at 9 lol.
Wrap prices very heavily on the installer. It takes finess to do it right. The guy that did mine is top tier he charges 3k+ i believe. |
9AM or PM? For your sake I hope it was 9am..... the day before:lol:
|
Originally Posted by RENESISFD
(Post 11219388)
9AM or PM? For your sake I hope it was 9am..... the day before:lol:
|
| All times are GMT -5. The time now is 07:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands