92 JDM Type R "Sakura"
#1
92 JDM Type R "Sakura"
What is up everybody.
Little about myself. Blah Blah Blah I had three FC's a while back. I just recently got an FD that I picked up about 3 months ago. I plan on taking her to the local tracks and possibly Tsukuba later this summer.
I have been mostly gathering interior pieces and random parts. My goal for this car is to just have a clean and fun car that I can take to the track or just drive around town.
Minutes after I picked her up
My car next to a buddies
My Garage
Also check out my buddies build:
https://www.rx7club.com/build-thread...o-mod-1122655/
Little about myself. Blah Blah Blah I had three FC's a while back. I just recently got an FD that I picked up about 3 months ago. I plan on taking her to the local tracks and possibly Tsukuba later this summer.
I have been mostly gathering interior pieces and random parts. My goal for this car is to just have a clean and fun car that I can take to the track or just drive around town.
Minutes after I picked her up
My car next to a buddies
My Garage
Also check out my buddies build:
https://www.rx7club.com/build-thread...o-mod-1122655/
Last edited by rx7fitz; 07-15-18 at 07:38 AM.
#2
This weekend I finished up fixing the rust behind the rear hatch and the previous owner installed a Mazdaspeed wing and decided to poorly plug the holes in the trunk. That being said every time it would rain I would have a puddle in my hatch. I removed the hatch and decided to go wingless for a while.
Here are some parts I installed last weekend
Powdercoated LRB under tray
ARM Trans Brace
Banzai Racing Diff Brace
Here are some parts I installed last weekend
Powdercoated LRB under tray
ARM Trans Brace
Banzai Racing Diff Brace
#3
So had a short weekend due to work. Also went to the track with my bike so didn't have much time to get work done. I did manage to remove the down pipe and get a bung welded up for my AFR gauge.
I unfortunately broke a bolt off in the turbo housing so now the turbo's have to come off so I can remove the broken bolt.
Here is a picture of my Drakes gauge pod. I'm going to fill the other hole with a Speedhut boost gauge once I get rid of the other one.
Had a bung welded on by a local guy and Im pretty impressed by his work.
I unfortunately broke a bolt off in the turbo housing so now the turbo's have to come off so I can remove the broken bolt.
Here is a picture of my Drakes gauge pod. I'm going to fill the other hole with a Speedhut boost gauge once I get rid of the other one.
Had a bung welded on by a local guy and Im pretty impressed by his work.
#4
Little update:
Took her to the track in august after she passed JCI. Powder coated many of the engine bits to ink black and some with a red disco flake. Im trying to get rid of all the blue "crap" every where. Also installed some Auto Exe bracing, racing beat sway bars and an EWP.
Took her to the track in august after she passed JCI. Powder coated many of the engine bits to ink black and some with a red disco flake. Im trying to get rid of all the blue "crap" every where. Also installed some Auto Exe bracing, racing beat sway bars and an EWP.
Thread
Thread Starter
Forum
Replies
Last Post
hondahater
2nd Generation Specific (1986-1992)
9
07-16-05 01:57 PM