Was wondering if there was anyone who has installed a wannaspeed mechanical H20 Kit onto a stockish FC.

Meaning stock turbo stock airbox etc. Where would I put this kit to maximize spray?

thanks,


Trying to rebuild my 400rwhp Turbonetics turbo back into what looks like stock, passes emissions like stock yet sill has some power. looking at BNR Stage 4 with new stock cat and new harness running all emissions equipment with PS1000 with patch loom.

 

I dont have the wannaspeed kit, but the original rice racing one. If you plan on running the stock air box, then you should have no issues installing the nozzle. I would basically install the nozzle on the outside of the airbox, on the bottom section (after the air filter)

 

Unless your going to run over 15psi water injection is a waste of time.

 

Even 16 psi on a BNR stage 4 turbo? I just want the car to look like stock and pass emissions. just looking at ways to get some power out of a stock car.

 

BNR stage 4 is NOT a stock car.