Innovate SSI 4 and TC-4 with Select 440D
#1
Innovate SSI 4 and TC-4 with Select 440D
Are you able to use these both connected to the Select Ecus?
Can you assign what you want to the sensors to be? For instance, If it want the SSI-4 to read my fuel pressure, oil pressure and oil temp, can I assign those items in the ecu from the output of the SSI 4 and set protection fail safes from those?
Likewise if I wanted to use a thermocouple for my IAT, could I assign a channel from the TC4 for IAT for the ECU to use as its source for IAT and use two other channels for it to use as EGTs?
Can you assign what you want to the sensors to be? For instance, If it want the SSI-4 to read my fuel pressure, oil pressure and oil temp, can I assign those items in the ecu from the output of the SSI 4 and set protection fail safes from those?
Likewise if I wanted to use a thermocouple for my IAT, could I assign a channel from the TC4 for IAT for the ECU to use as its source for IAT and use two other channels for it to use as EGTs?
#2
Rotary Freak
iTrader: (10)
Are you able to use these both connected to the Select Ecus?
Can you assign what you want to the sensors to be? For instance, If it want the SSI-4 to read my fuel pressure, oil pressure and oil temp, can I assign those items in the ecu from the output of the SSI 4 and set protection fail safes from those?
Likewise if I wanted to use a thermocouple for my IAT, could I assign a channel from the TC4 for IAT for the ECU to use as its source for IAT and use two other channels for it to use as EGTs?
Can you assign what you want to the sensors to be? For instance, If it want the SSI-4 to read my fuel pressure, oil pressure and oil temp, can I assign those items in the ecu from the output of the SSI 4 and set protection fail safes from those?
Likewise if I wanted to use a thermocouple for my IAT, could I assign a channel from the TC4 for IAT for the ECU to use as its source for IAT and use two other channels for it to use as EGTs?
Andy did a video on this in 2014, and Shawn used both a TC4 and SSI4 simultaneously into what could have only been a Select at the time of post.
https://www.rx7club.com/adaptronic-e...stall-1063269/
Thread
Thread Starter
Forum
Replies
Last Post