yet another idle problem - help a n00b!
Senior Member
Joined: Jul 2006
Posts: 582
Likes: 0
From: Stow, Ohio
well i know if they were stuck open in the sense that they were mechanically stuck that wouldnt cause a problem to the injector really...im just thinking of that high of a current frequency going through the injectors...he said they were shorted. you'd think that would definately build up some heat in those suckers
Originally Posted by Sr20fd3st
lol that 9 minutes is a very long 9 minutes..makes my stomach churn in thought of coolant seals...did you do bubble test? it doesnt look like thats normal condensation, it goes away fairly quickly...actually it looks like its gettign worse the longer it's running...bad coolant seal usually makes it run worse once it's warmed up, since the coolant pressure builds and starts to push more and more coolant into the combustion chamber...
thewird
Senior Member
Joined: Jul 2006
Posts: 582
Likes: 0
From: Stow, Ohio
when my coolant seals went it was sort of weird...it started out with moderate smoke..as the coolant warmed up and got pressure the smoke increased, but after a while the mtor got warm enough it seams it heated up to the point where the sealing surfaces expanded and then all the smoke would pretty much go away...it was weird...check your turbos to see if they are leaking oil...as the 2 can look similar, especially if its only leaking oil on the hot side, dripping into the exhaust, and getting burnt away when you hit the throttle and eventually clearing itself out
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM