Xcessive LIM and FFE 4 injector rail
03-24-16, 09:55 PM
#1
Xcessive LIM and FFE 4 injector rail
I tried searching but no luck. Just wondering if anyone's running the xcessive LIM with FFE 4-injector rail (blocked off primary). What injectors are you running and how is the driveability?
Also, I am planning to run 4x1000cc bosch ev14's. The rail extension provided with the FFE rail seems to be too long (by about 0.1"). See attached picture which shows the 60mm extension. I also ordered the 48mm extension and tried it without the top hats and it too is too long (by same amount 0.1"). I'm also using the lower insert and installed them as per instructions.
Also, I am planning to run 4x1000cc bosch ev14's. The rail extension provided with the FFE rail seems to be too long (by about 0.1"). See attached picture which shows the 60mm extension. I also ordered the 48mm extension and tried it without the top hats and it too is too long (by same amount 0.1"). I'm also using the lower insert and installed them as per instructions.
