worth the buy
06-11-04, 09:10 PM
#1
Full Member
Thread Starter
Join Date: May 2004
Location: california
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
worth the buy
there is a mazda rx7 1994 really clean on the inside. the motor has about 114,000 miles on it. dosent look like it was driven hard but i am new to rotaries and dont know what to look for. anyhting anyone could help me with what to look for maybe a certain noise , leak on the ground after i drove it. somthing please help and how good would the motor be after that many miles if it wasnt driven hard and if it was driven hard how many miles are left on it? thanks for the time to read the post and with any help. also the car is stock
nathan
nathan
06-11-04, 09:13 PM
#2
Rotary Enthusiast
06-11-04, 10:29 PM
#3
There is no set time limit on these engines. They just don't automatically fail after XXXXXX number of miles.
If losing the engine is a concern, look for a different type of car.
As far as what to look for, check the newbie links posted above. They have FAQ sections which will help you in your buying/looking process if you still want to look at 3rd Gen RX-7's.
If losing the engine is a concern, look for a different type of car.
As far as what to look for, check the newbie links posted above. They have FAQ sections which will help you in your buying/looking process if you still want to look at 3rd Gen RX-7's.
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM