3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Wiring troubles

Thread Tools
 
Search this Thread
 
Old May 1, 2003 | 07:55 PM
  #1  
Spyders 7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 28
Likes: 0
From: The 'boro,TN
Wiring troubles

Ok just took a trip down vaccum hose hell and now I'm stuck. I have one female plug I didn't mark. It is orange on the inside, blue outter casing. The wires are brown with a black stripe and a black with a green stripe. Where it is at right now is beside the Air pump, not plugged in...can't find a thing to plug it into. The two solenoids are plugged in, as well as the air pump and alternator. Help!? I'm gonna try to get pics tomorrow if I can borrow a camera. Until then, anybody really good with the wires?
Reply
Old May 1, 2003 | 10:06 PM
  #2  
xstacy7's Avatar
I love when things work
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 1,090
Likes: 0
From: Nashville, TN
I'm going to go out on a limb here and say it's EGR if my memory serves me correctly. The '93 don't have EGR so put a resistor on there. Might want to double check, but that's what I'm thinking. Did you just get an RX-7? You're about 30 minutes away from me, I could help you out if you need it. I'm in Brentwood just south of Nashville
Reply
Old May 2, 2003 | 02:46 AM
  #3  
Spyders 7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 28
Likes: 0
From: The 'boro,TN
Yea I had it a month...was down awhile installing a new clutch. Kept it on the road another two months, now its been down almost another month with me messin with the hoses.

Sorry I just realized I didn't specify the car. It is a '93 Touring.
Reply
Old May 2, 2003 | 08:57 AM
  #4  
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 733
Likes: 0
From: blah
If it is light blue, than it is just used foe california models. egr, like mentioned above. just push it outta the way.
Reply
Old May 2, 2003 | 04:06 PM
  #5  
Spyders 7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 28
Likes: 0
From: The 'boro,TN
Then that means...I'm...I'm...DONE! HAHAHAHA!! Now I get to see what a functional FD runs like.
Reply
Old May 2, 2003 | 08:13 PM
  #6  
duboisr's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 2,171
Likes: 1
From: Nashville Tn
You may be near Garfinkle if you need ever need help . He is in Murfreesboro, also
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Bauer778
3rd Generation Specific (1993-2002)
10
Nov 4, 2015 04:42 PM
gxl90rx7
Haltech Forum
4
Sep 14, 2015 03:09 PM




All times are GMT -5. The time now is 08:48 AM.