Wiring 99 Spec combo lights to stock harness ?
05-04-05, 08:38 AM
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Montreal, QC, Canada
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Wiring 99 Spec combo lights to stock harness ?
I don't have time to order the 99 spec harness so I will use small connectors and splice wires on the stock harness.
My concern is that there are 3 wires on the stock harness going to the flasher bulb light connector and there is only 2 connectors on the 99 spec flasher bulb light connector.
I would like to know exactly which wires I need.
Thanks a lot guys !
My concern is that there are 3 wires on the stock harness going to the flasher bulb light connector and there is only 2 connectors on the 99 spec flasher bulb light connector.
I would like to know exactly which wires I need.
Thanks a lot guys !
05-04-05, 10:15 AM
#2
Birds can DRIFT YO...!!!!
one is ground, one is the hazard probably and the other is the turn signal, jus hook up the hazard/turn signal together
i think thats wat i did but i don't really recall
i think thats wat i did but i don't really recall
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Microtech
3
08-22-15 05:52 PM
