Hey guys. I got the complete 99 oem nose and foggers. I have a 93 base which did not come wired w/ foglights. I did purchase the oem foglight switch though. .Just want to make sure this will work for me( starting from the lights).

1. Splice the foglight grounds together and attach to closest grounding point.
2. Splice the blue W/ red stripe wires together and run to the white wire at
switch.
3. Run the red w/ yellow stripe wire from switch to 12V w/ a inline fuse.
4. Connect the other two smaller wires from switch to ashtray light.

This should make the lights come on w/ switch activation correct?
Also what amp fuse should I run inline? Thanks Garret......

 

Garrett,

sorry I don't have an answer to your question...but for the actual fog lights in front...did they plug directly into the existing wiring without splicing?

 

No the connecters are a bit different from the s-8 harness to the s-6 harness.
^^^^

 

anyone??