wire tuck/fuse box relocation info
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: TX
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
wire tuck/fuse box relocation info
my motor has been out, and was wondering if anyone knows a link or any write up to wire tucking, or pointless fuse box relocations. just something to clean up the engine bay a bit.
my battery has already been relocated, and was done pretty shitty so im back tracking and going to try and clean that up a bit.
hope to find some help--
thanks.
my battery has already been relocated, and was done pretty shitty so im back tracking and going to try and clean that up a bit.
hope to find some help--
thanks.
#4
Senior Member
iTrader: (1)
I am in the process of moving all the fuse boxes/relay boxes inside the car. It doesn't seem to be very difficult if you know your way around wiring a little. It looks like I can hide all the under hood body wiring under the fenders and just extend them for the relocated fuse boxes. You will need to pull the dash out to be able to easily pull the wiring. The wiring under the hood is shaped like a horse shoe... it runs from both sides of the dash (fuse box on the one side and near/into the ecu on the other side). The fuse/relay box in the middle of the rad support is the center point of the wiring. Pull it from both sides to that point, then just move it all inside the car and hide it away, then extend the wires to you accessories.
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM