Okay I checked the hoses none seemed to be plugged since it can get wiper fluid. When I pull on the lever to shoot the fluid nothing happens does this mean its a wiring problem? I mean do I have to take apart the steering column or look for some other wires?

 

pump could be bad...

 

Thanks for the quick response but I have no idea where that is i need to buy a manual or handbook for the FD anyone got a link?

 

search you n00b!!

j/k, but yeah try searching for it, its not hard to find.

 

Yea I'm a n00b so at least tell me where it is in the vicinity, I've tried looking this is my last problem I fixed all the other things. Massachusetts sucks you have to have working wiper fluid to pass inspection.

 

Here's a link to both factory service manuals --

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/94-fsms-available-download-449950/

I don't know why that thread hasn't been stickied or added to the FAQ....

 

Thanks boss downloading those manuals right now.

 

I finally got the manuals I checked the pump and the pump it good it works fine. Thing I notice is when I test the pump with the battery it works hook it back up and try to do the wiper fluid nothing the pump doesn't move. Any ideas stupid mass you have to have wiper fluid working to pass inspection. I don't even want to start with how they don't like how the car sounds .

 

Perhaps your hoses are clogged. Take them off and blow them out. Also blow out the squirters on the hood.

 

Pump is on the fluid tank (resivoir) At least it is on the rear washer tank, and Mazda probably uses the same pump for both. You should be able to hear it running when you pull the lever, blown fuses ? ? ? Mybe it's just unhooked.

 

I never use my wiper fluid (years). I guess I should check to see if it still works he he

 

I'm pretty sure I hooked it up back right . When I was pulling on the lever my buddy said it wasn't working I put the pump on the battery it works. Wheres the fuse for that pump anyway?