Will this work?
#1
Junior Member
Thread Starter
Join Date: Jun 2006
Location: Silver Lake, KS
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Will this work?
Well...I feel like an idiot. Basically I got a website from a buddy of mine to order a replacement motor, unfortuanately he was out of town when I made the order. After talking to him he's not sure if the motor I ordered will work, so I'm hoping someone here has an opinion. I have a 94 stock rx-7, stock motor, tt, manual transmission, etc. The motor that i ordered is this one 13B sequential
According to the website selling the motor, this is a newer motor that uses sequential turbos and they do not have any of the older ones (the one that I have in my car), but they said it should still work, then they proceeded to tell me thy dont install so i need to check with my installer. Any help would be greatly appreciated.
According to the website selling the motor, this is a newer motor that uses sequential turbos and they do not have any of the older ones (the one that I have in my car), but they said it should still work, then they proceeded to tell me thy dont install so i need to check with my installer. Any help would be greatly appreciated.
#2
Mr. Links
iTrader: (1)
Sounds like its a 13B Cosmo motor (and from the picture as well), however the description on the website has the specs for the later 99+ RX-7 engines. Who knows what you'll get!
If you get a Cosmo motor, you are in for a headache as it's not a direct bolt up application. If you get a 99+ 13B-REW, then you can use the core engine and your accessories.
If you get a Cosmo motor, you are in for a headache as it's not a direct bolt up application. If you get a 99+ 13B-REW, then you can use the core engine and your accessories.
#3
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
You're screwed. That is a 13B-RE from a Cosmo, not a 13B-REW. It will not bolt-in. Why didn't you just get your blown motor rebuilt or order a Mazda re-man instead of spending $1500 on a USED engine of UNKNOWN condition?
#6
Junior Member
Thread Starter
Join Date: Jun 2006
Location: Silver Lake, KS
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rynberg
You're screwed. That is a 13B-RE from a Cosmo, not a 13B-REW. It will not bolt-in. Why didn't you just get your blown motor rebuilt or order a Mazda re-man instead of spending $1500 on a USED engine of UNKNOWN condition?
#7
Mr. Links
iTrader: (1)
Originally Posted by MattJ016
Whats this Mazda reman you speak of?
Thread
Thread Starter
Forum
Replies
Last Post
maikelc
3rd Generation Specific (1993-2002)
8
08-24-15 11:04 AM