does anybody know if the greedy 2 row will fit with the stock bumper??? Does anybody have any pics????

 

Yes it will fit but does require a little trimming on the inside of the bumper. Search for pics. They are everywhere.

 

You also have to relocate the radiator and move the battery or change it to a smaller one.

 

I've got lots of pics and a narrative of the installation on my site if you will be doing the installation yourself.

http://flathat.woodstream.net/RX7/Docs/Greddy_FMIC.html

http://flathat.woodstream.net/RX7/Greddy_FMIC_Install/

K

 

Nocab, i have a quick question on the instal (or anyone else for that matter). People say they trim their front bumper, but if its an aftermarket FG bumper, would that basically entail sanding the front bumper down 2 inches to get it to fit? Or is there another way of trimming that eludes me?

Please fill me in, as im looking to get the GReddy FMIC, but would have to send the car into the shop for inital installation (bc i only get 2 days off a week spread at each end). Do you think any astute speedshop can install it?

 

When I installed mine I used a jigsaw to trim the front bumper. I would trim a little then put it up and to the car and make sure I was not trimming to much. Total was about 2 inches.

Jason
www.rx7store.net