Whistling Noise
There was a very similar thread in the other section:
https://www.rx7club.com/vforums/show...threadid=27651
See if that helps.
https://www.rx7club.com/vforums/show...threadid=27651
See if that helps.
It's never fast enough...
Joined: Feb 2001
Posts: 3,760
Likes: 3
From: Miami - Given 1st place as the POOREST city in the US as per the federal government
It's called BOOST 
Check your Hoses between the Y-pipe and the upper tube and the IC hoses. The most COMMON conector to fail is the one right above the Y-pipe. You can't even hardly see it unless you remove the tube connected to it. Don't be fooled by it. You almost never see a slit on it unless you take it off and bend it around.
Even a SMALL slit probably wont cause a drop in boost, but it WILL cause a whistle.

Check your Hoses between the Y-pipe and the upper tube and the IC hoses. The most COMMON conector to fail is the one right above the Y-pipe. You can't even hardly see it unless you remove the tube connected to it. Don't be fooled by it. You almost never see a slit on it unless you take it off and bend it around.
Even a SMALL slit probably wont cause a drop in boost, but it WILL cause a whistle.
Thread
Thread Starter
Forum
Replies
Last Post
Linda_Lovelace
General Rotary Tech Support
0
Sep 18, 2015 10:04 PM



