3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

where to find these FD parts?

Thread Tools
 
Search this Thread
 
Old Feb 15, 2004 | 02:57 PM
  #1  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 65
Likes: 0
From: Piedmont, NC
where to find these FD parts?

hey i need a new set of tan floor mats, mine are way gone and dealer prices are horrendous - does anyone know where i can get them?

and im not sure on specifics but the little hose that carries the boosted air into the engine is cracked so i need a new one, preferably silicone, does anyone know where i can get one?

and a new stock airbox is needed also

i think thats it

- Jon
Reply
Old Feb 15, 2004 | 03:24 PM
  #2  
wickedrx7's Avatar
Rotary Enthusiast
Tenured Member: 25 Years
iTrader: (14)
 
Joined: Apr 2001
Posts: 1,300
Likes: 0
From: Chicago
do a search on the forum for ray at malloy mazda, he gives pretty good prices on dealer parts. I would check the used parts area on the forum for the airbox, I am sure there are a lot of people willing to sell there's for $25 or so.

Good luck
Reply
Old Feb 15, 2004 | 04:21 PM
  #3  
rynberg's Avatar
Lives on the Forum
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
There are no more floor mats. If a dealer says they can get you a set, they must have a set in storage or something. You can get high quality mats for like $50 from www.mazdatrix.com. They don't have the "RX-7" embroidered on them however.

What little hose that carries boosted air into the engine? Just buy a piece of 4mm (5/32") rubber vacuum line at the auto parts store.

wickedrx7 is right, pick up a used intake box for $25-$50 off of the forum
Reply
Old Feb 15, 2004 | 04:37 PM
  #4  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 65
Likes: 0
From: Piedmont, NC
ok so your positive its 4mm hose that i need?


i dunno im pretty new to Rx7's and the guys at the shop we had do the inspection on the car said the hose that carries the boosted air to the engine was cracked - are there more than one?
Reply
Old Feb 15, 2004 | 04:58 PM
  #5  
wickedrx7's Avatar
Rotary Enthusiast
Tenured Member: 25 Years
iTrader: (14)
 
Joined: Apr 2001
Posts: 1,300
Likes: 0
From: Chicago
Get your hands on a digital camera for that hose, there are a ton of hoses on this engine, we can't say for sure which one it is.
Reply
Old Feb 15, 2004 | 05:11 PM
  #6  
skunks's Avatar
I'm a CF and poop smith
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 3,957
Likes: 1
From: Hawaii
Originally posted by phsst........ phsst......
ok so your positive its 4mm hose that i need?


i dunno im pretty new to Rx7's and the guys at the shop we had do the inspection on the car said the hose that carries the boosted air to the engine was cracked - are there more than one?
take a photo, oryou can just pull it off and bring it in to any auto store and have them cut you a new peice
Reply
Old Feb 15, 2004 | 06:08 PM
  #7  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 65
Likes: 0
From: Piedmont, NC
i think we need the hose that goes from the y pipe to the intercooler so we will probably just order the efini y pipe and metal hose kit
Reply
Old Feb 16, 2004 | 12:54 AM
  #8  
cruiser's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Dec 2002
Posts: 2,522
Likes: 0
From: Slovenia, Europe
Thats not a little hose. Thats a crossover pipe. Or the IC intake rubber hose. Definately not a little hose....
Reply
Old Feb 16, 2004 | 12:55 AM
  #9  
jimlab's Avatar
Super Snuggles
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 10,091
Likes: 34
From: Redmond, WA
Originally posted by rynberg
They don't have the "RX-7" embroidered on them however.
Which is actually a plus for some people.

They're very high quality mats, by the way.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
runner83
1st Gen General Discussion
16
Aug 26, 2015 05:16 PM
Brice_Brice
2nd Generation Specific (1986-1992)
7
Aug 18, 2015 10:42 AM
Junkee
New Member RX-7 Technical
2
Aug 15, 2015 01:57 PM




All times are GMT -5. The time now is 11:18 AM.