Where to find Street Port template????
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Mar 2002
Location: Neenah, WI
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Where to find Street Port template????
Soon I will be starting the rebuild of my engine and want to have it street ported. Does anyone know where I can find or have a street port template? If not does anyone know what a shop would charge to have a shop do the street port only? I have tried searching but has been search is disabled.
Thanks
Thanks
#4
Rotary Enthusiast
Join Date: Aug 2001
Location: Memphis, TN - wishin' i was back in Ft Worth
Posts: 1,024
Likes: 0
Received 1 Like
on
1 Post
if you have it apart, send the plates and housings to nick or louie at rotary racing and reliability......$300 to do a large streetport. have artguy chime in on this. i believe louie told me they did his motor
Trending Topics
#8
NorCal 7's Co-founder
NOTA944 just got a template for a medium size streetport from Racing Beat. You should PM him and see if he would get rid of it. He should be done with it now. Hope that helps bro. Laterz.
Zach
Zach
#10
Senior Member
Join Date: Sep 2001
Location: California
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where to find Street Port template????
2 HOTT,
I have used Mazdatrix templates for years and have been happy with every one. I'm friends with the guys there so they lent them to me last time but I believe they do sell them.
If it were me, I wouldn't use templates from any other places then Mazdatrix, Pettit or Pineapple- they've done enough engines to know what works and what doesn't. Aside from the template, it's also gonna take a fairly good hand to do the job nicely. I remember my first time porting a 2nd gen middle steel housing- if you go to deep, you're in to the water passage. I thought I had a hairline crack from going too deep/thin but it turned out I was fine.
Good luck bro.
-Tom
I have used Mazdatrix templates for years and have been happy with every one. I'm friends with the guys there so they lent them to me last time but I believe they do sell them.
If it were me, I wouldn't use templates from any other places then Mazdatrix, Pettit or Pineapple- they've done enough engines to know what works and what doesn't. Aside from the template, it's also gonna take a fairly good hand to do the job nicely. I remember my first time porting a 2nd gen middle steel housing- if you go to deep, you're in to the water passage. I thought I had a hairline crack from going too deep/thin but it turned out I was fine.
Good luck bro.
-Tom
Originally posted by 2 hott
Soon I will be starting the rebuild of my engine and want to have it street ported. Does anyone know where I can find or have a street port template? If not does anyone know what a shop would charge to have a shop do the street port only? I have tried searching but has been search is disabled.
Thanks
Soon I will be starting the rebuild of my engine and want to have it street ported. Does anyone know where I can find or have a street port template? If not does anyone know what a shop would charge to have a shop do the street port only? I have tried searching but has been search is disabled.
Thanks